Metra Electronics 99-7606 installation instructions Stacked ISO Head Units Provision, Figure C

99-7606KIT ASSEMBLY

STACKED ISO HEAD UNITS PROVISION

1Cut and remove center divider from radio housing. (Figure A)

2Snap the Double DIN brackets to the inside edge of the radio hous- ing. (Figure B)

3Slide the stacked ISO units into the Double DIN bracket/radio housing assembly and secure the units to the kit using the screws supplied with the head units. (Figure C)

4Snap the Double DIN trim-plate onto the housing/radio assembly.

(Figure C)

A

B

Continue to final assembly.

C

7