Metra Electronics 99-7606 installation instructions Double DIN Radio Unit Provision

Page 8

99-7606KIT ASSEMBLY

DOUBLE DIN RADIO UNIT PROVISION

1Cut and remove center divider from radio housing. (Figure A)

2Snap the Double DIN brackets to the inside edge of the radio hous- ing. (Figure B)

3Slide the Double DIN radio into the Double DIN bracket/radio housing assembly and secure the radio to the kit using the screws supplied with the head unit. (Figure C)

4Snap the Double DIN trim plate onto the housing/radio assembly. (Figure C)

A

B

Continue to final assembly.

C

6

Image 8
Contents 99-7606 Table of Contents Nissan Titan Nissan Pathfinder Armada Figure aContinue to kit assembly 99-7606PRE-KIT Assembly DIN Radio Provision with Pocket ISO Radio Provision with Pocket Double DIN Radio Unit Provision Stacked ISO Head Units Provision Figure CFinal Assembly 99-7606 Instructions