MURO CH7241U manual Parts designation Setting up the specific adaptor kit

Page 2

￿Parts designation￿

￿Setting up the specific adaptor kit￿

The way to mount the kit is somewhat different depending on the manufacturer and type of your screwdriver. Refer to "How to mount by screwdriver type" that comes with the specific adaptor kit.

￿Attaching and detaching the specific bit￿

Attaching ￿Pull the sleeve toward the screwdriver. ￿Insert the bit into the socket and push the sleeve back into place.

￿Make sure the bit is tight enough in position. Detaching ￿Pull the sleeve toward the screwdriver.

￿Draw out the bit.

￿The CH7241 genuine bit, which comes with the specific adaptor kit, is of double-head type. When one of the heads has worn out, use the other side. Replace the bit when both the heads have worn out.

￿Mounting and dismounting the attachment￿

Mounting ￿Tilt up the hook.

￿ Insert the screwdriver's adaptor into this attachment.

￿Make sure the bit comes in together. Dismounting ￿Tilt down the hook.

￿Tilt up the hook.

￿Draw the screwdriver's adaptor out of this attachment.

Image 2
Contents Safety precautions SpecificationsMounting and dismounting the attachment Parts designation Setting up the specific adaptor kitAttaching and detaching the specific bit Tightening the screws Adjusting the screw-driving depthTroubleshooting Maintenance and inspection CH7000 Attachment Warranty Card