Ryobi DSG50 manual Features

Page 7

FEATURES

WARNING:

Carefully read through this entire operator's manual before using your new screwdriver. Pay close attention to the Safety Rules, Warnings and Cautions. If you use your screwdriver properly and only for what it is intended, you will enjoy years of safe, reliable service.

KNOW YOUR DRYWALL SCREWDRIVER

See Figure 1.

Before attempting to operate your screwdriver, familiarize yourself with all operating features and safety requirements.

VARIABLE SPEED

This tool has a variable speed switch that delivers higher speed with increased trigger pressure. Speed is con- trolled by the amount of switch trigger depression.

BELT CLIP

A convenient feature provided on your screwdriver is a belt clip. It is molded on top of the motor housing of your screwdriver.

MAGNETIC BIT HOLDER

Your screwdriver has a magnetic bit holder. The magnet holds screwdriver bit and screws until ready to drive into drywall.

WARNING:

ADJUSTABLE NOSEPIECE

Your screwdriver has an adjustable nosepiece for vary-

If any parts are missing, do not operate your

ing screw depth. It can also be removed for easy bit

screwdriver until the missing parts are replaced.

changes.

Failure to do so could result in possible serious

ELECTRICAL CONNECTION

personal injury.

Your screwdriver has a precision built electric motor. It

 

SWITCH

should be connected to a power supply that is 120

To turn your screwdriver ON, depress the switch trigger.

volts, 60 Hz, AC only (normal household current). Do

not operate this tool on direct current (DC). A substantial

Release switch trigger to turn your screwdriver OFF.

voltage drop will cause a loss of power and the motor will

FORWARD/REVERSE LEVER

overheat. If your screwdriver does not operate when

Your screwdriver has a forward/reverse lever located

plugged into an outlet, double-check the power supply.

 

above switch trigger for changing direction of bit rotation.

 

 

BELT CLIP

ADJUSTING SLEEVE

 

ADJUSTABLE

 

NOSEPIECE

 

1/4 in. (6.4 mm)

LOCK-ON

SCREWDRIVER

BUTTON

BIT

 

MAGNETIC

FORWARD / REVERSE

BIT HOLDER

LEVER

SWITCH

TRIGGER

Fig. 1

7

Image 7
Contents Thank YOU for Buying a Ryobi Drywall Screwdriver Save this Manual for Future ReferenceIntroduction Table of ContentsWork Area General Safety RulesService Specific Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsSafety and International Symbols Features Operation Product SpecificationsReversible INSTALLING/REPLACING BIT Holder and BitsDriving Screws Setting DepthLubrication MaintenanceGeneral Extension CordsRyobi TECHNOLOGIES, INC Service Model NO. and Serial no