MITSUBISHI POCKET
1Disconnect the negative battery terminal to prevent an accidental short circuit.
2Snap Pocket Trimplate MIT onto the front of the Pocket. Locate one of the Left Brackets and mount it to the “L” side of the Pocket with
(2) #6 x 1/4" Phillips Flat Head Screws. Next locate one of the Right Brackets and mount it to the “R” side of the Pocket with (2) #6 x 1/4" Phillips Flat Head Screws. (Figure A)
3Mount the factory brackets to the shaded bosses (Fig. B2) with (4) #8 x 1/4" Phillips Pan Head Screws supplied and mount the entire assembly to the
A
B
B2
1