Switch action (Fig. 12)
CAUTION :
Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.
To start the tool, simply pull the trigger. Release the trigger to stop. For continuous operation, pull the trigger and then push in the lock button. To stop the tool from the locked position, pull the trigger fully, then release it.
Switch t r i g g e k L o c y u t t o n
Fig. 12
Continuous running (Fig. 12)
Press the trigger and a t the same time push the lock button. To stop this lock position, press the trigger and release it.
Variable trigger speed control (Fig. 12)
The speed varies from 0 to maximum, depending on the pressure applied to the trigger. The more the trigger is pressed, the faster the tool runs.
Reversing switch action (Fig. 13)
This tool has a reversing switch to change the direction of rotation. Press the upper side (FWD side) of the switch for clockwise rotation or the lower side ( R E V side) of the switch for counterclockwise rotation.
Reversing switch
Fig. 1:
CAUTION :
0 Always check the direction of rotation before operation.
.Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool.
9