GEARING SECTION
DRIVE GEARING
DISASSEMBLY
a.Remove spindle and components from ring gear.
b.To remove gears from spindle, remove bearing, spacer and shafts.
ASSEMBLY
NOTE: Pack bearings and lubricate gears liberally with ARO 33153 grease upon assembly. Gearing assembly should contain
32325 BEARING
39325 RING GEAR
approximately 1/8 oz. (3.5 g) of grease.
a.Assemble spacer (33691 or 33693) and gears to spindle and secure with shafts, aligning notch in shafts with spacer. NOTE: Shafts (33686) contain fifteen (15) loose needle bear- ings (33458) per shaft.
b.Assemble spacer (37676), where applicable, and bearings to spindle and assemble to ring gear.
36324 GEARING ASSEMBLY
5.5:1
36326 SPINDLE | 32325 BEARING |
32325 BEARING
36325 RING GEAR
37676 SPACER
36327 GEARING ASSEMBLY
3.4:1
33691 SPACER
(9 INTERIOR - 17 EXTERIOR TEETH)
32325 BEARING
36325 RING GEAR
- | 36329 GEARING ASSEMBLY |
| 6.8:1 |
36330 SPINDLE | 32325 BEARING |
6