Specifications
Batteries | 4.8 V NiCd Battery Pack |
Charging Time | No more than 10 hours |
Charger Adapter | Input: 120 VAC, 60 Hz |
| Output: 6 VDC, 300 mA |
Speed | 200 RPM |
Chuck | Hex drive |
Features | 6 – Driver bits included |
Save This Manual
Keep this manual for the safety warn- ings and precautions, assembly, operating, inspection, maintenance and cleaning pro- cedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
General Safety Rules
WARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
The term “power tool” in all of the warnings listed below refers to your
Work Area
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visi- tors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and
sparks. Provide barriers or shields as needed.
Electrical Safety
1.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.
2.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
3.Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electri- cian if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.
4.The Charger Adapter is equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system.
5.Do not abuse the Charger Adapter charging cable. Never use it to carry the tool or pull the Adapter from an outlet. Keep the charging cable away from heat, oil, sharp edges, or moving parts. Replace Charger Adapter when charging cable is damaged.
SKU 95065 |
| REV 07l |
For technical questions, please call | Page |