Black Box Delux Optical Power Meter with Memory, FOPM-210 NOM Statement and Safety Information

Page 5

NOM Statement and Safety Information

18.Servicio por personal calificado deberá ser provisto cuando:

A:El cable de poder o el contacto ha sido dañado; u

B:Objectos han caído o líquido ha sido derramado dentro del aparato; o

C:El aparato ha sido expuesto a la lluvia; o

D:El aparato parece no operar normalmente o muestra un cambio en su desempeño; o

E:El aparato ha sido tirado o su cubierta ha sido dañada.

SAFETY INFORMATION

WARNING: Never look directly into optical outputs or a fiber while the equipment is on. Invisible and visible laser beams may damage your eyes.

Do not short-circuit the AC adapter/charger terminal and the batteries. Excessive electrical current may cause personal injury due to fumes, electric shock, or equipment damage.

Connect the AC power cord to the equipment and wall socket properly. When you insert the AC plug, make sure there is no dust or dirt on the terminals and both plugs are fully seated.

WARNING: If the AC plug is not connected properly, fuming, electric shock, or equipment damage might occur and may result in personal injury.

Do not operate the equipment near hot objects, in hot environments, in dusty/humid atmospheres, or when condensation is present on the equipment. This may cause electric shock, product malfunction, or poor performance.

724-746-5500 blackbox.com

Page 3

Image 5
Contents Deluxe Optical Power Meter with Memory Page Blackbox.com Normas Oficiales Mexicanas NOM Electrical Safety StatementFCC and NOM Statements Deluxe Optical Power Meter with Memory Safety Information NOM Statement and Safety InformationTrademarks Used in this Manual Table of Contents General Specifications Specifications Optical SpecificationsOverview FeaturesOverview Introduction What’s IncludedBattery indicator full Operation Battery IndicatorAC Operation OperationKeypad Keypad functions Number 1 throughConnectors Using the Deluxe Optical Power Meter with MemoryFC/PC connector FC/ST, FC/SC interchangeable 3 LCD Turning the Optical Power Meter On and OffSwitching Measurement Mode Setting the WavelengthFrequency Detecting Setting and Checking the Reference LevelSwitching LCD Backlighting On and Off Checking the Storage Records Measured Power Value OverflowStoring the Current Test Value Connecting to the Optical Laser Source Maintenance MaintenanceShipping and Packaging Appendix. Troubleshooting Calling Black BoxExclusions WarrantyThree-Year Limited Warranty Blackbox.com Blackbox.com About Black Box Black Box Tech Support FREE! Live /7