Sanyo KS2462R instruction manual Adjusting the Airflow Direction, Sweep function

Page 19

Adjusting the Airflow Direction

1.Horizontal The horizontal airflow can be adjusted by moving the vertical vanes with your hands to the left or right.

CAUTION

When the humidity is high, the vertical vanes should be in the front position during the cooling or drying operation. If the vertical vanes are positioned all the way to the right or left, condensation may begin to form around the air vent and drip down.

2.Vertical The vertical airflow can be adjusted by moving the flap with the remote control unit. Do not move the flap with your hands. Confirm that the remote control unit has been turned on. Use the FLAP button to set either the sweep function or one of the six airflow direction settings.

(The maximum capacity is obtained at the position at 4.)

A. Sweep function

The flap starts moving up and down to deliver air over the sweep range.

COOL

and SWEEP DRY

(Recommended operating range)

B. Setting the airflow manually

Referring to the above illustration, use the FLAP button to set the airflow direction within the range used during the cooling or drying operation.

NOTE

CAUTION

The flap automatically closes when the unit is off.

Use the FLAP button on the remote control to adjust the position of the flap. If you move the flap by hand, the flap position according to the remote control and the actual flap position may no longer match. If this should happen, shut off the unit, wait for the flap to close, and then turn on the unit again; the flap position will now be normal again.

Do not have the flap pointed down during cooling operation. Condensation may begin to form around the air vent and drip down.

OI-508-19EG

19

Image 19
Contents KS2462R Features Alert Symbols ContentsProduct Information Safety Instructions Installation LocationElectrical Requirements Indoor Unit Names of PartsOutdoor Unit Remote Control Avoid using radio equipmentSuch as mobile phone near 1HR Sensor Temperature settingTimer and Present Time Setting buttonsCool Remote Control UnitHour OFF Timer DRYRemote Control Unit Installation Position Using the Remote Control UnitHow to Install Batteries How to Use the Remote Control UnitSecuring the remote control unit to prevent theft Using the Remote Control UnitMounting the Remote Control Unit When using the remote control unitStep Operation with the Remote Control UnitManual Operation StepAdjusting the Fan Speed Operation with the Remote Control UnitFAN Speed Night Setback Night Setback Mode``DRY Operation Power failure during operation Clicking SoundRemote Control Unit Special RemarksHow to set the present time Setting theTimerOperation Indication How to set a program for daily ON/OFF operation Setting the TimerCancellation procedure Setting the 1-Hour OFFTimerHour OFF Timer Operation Together with the Program Timer Setting procedureSweep function Adjusting the Airflow DirectionCare and Cleaning Operation without the Remote Control UnitOperation OFFselector Air intake grille Care and CleaningHow to remove the anti-mold filter How to replaceCleaning the main unit and remote control unit How to install the air cleaning filterRemoving and remounting Tips for Energy SavingDivision of Sanyo North America Corporation TroubleshootingOperating Range Sanyo Fisher Company

KS2462R specifications

The Sanyo KS2462R is a notable air conditioning unit that has garnered attention for its efficient cooling and heating capabilities, making it an ideal choice for various environments, whether residential or commercial. Renowned for its advanced technology and thoughtful design, the KS2462R offers users comfort and energy efficiency.

One of the standout features of the KS2462R is its inverter technology. This innovative system allows the compressor to adjust its speed according to the indoor temperature, resulting in a more consistent and comfortable climate while minimizing energy consumption. By avoiding the frequent cycling on and off typical in traditional systems, the inverter technology not only enhances comfort but also leads to considerable energy savings over time.

Additionally, the Sanyo KS2462R comes equipped with a powerful cooling capacity, enabling it to efficiently cool larger spaces in a short amount of time. The ability to operate at varying speeds ensures that it can maintain the desired temperature while also adapting to changing external conditions. This feature is particularly beneficial during extreme weather conditions, where rapid cooling and heating might be necessary.

Another important characteristic of the KS2462R is its advanced filtration system. This includes a multi-stage filtration process designed to purify the air by trapping dust, allergens, and pollutants. As a result, the air quality in indoor environments becomes significantly improved, promoting a healthier living atmosphere for occupants.

The unit is also designed with user convenience in mind. It features a user-friendly remote control, making it easy to adjust settings from across the room. Furthermore, the quiet operation of the KS2462R ensures that it doesn’t become a distraction, creating a serene environment whether it is being used at home or in an office setting.

Durability and reliability are also hallmarks of the Sanyo KS2462R. Constructed with high-quality materials and components, this air conditioning unit is designed to withstand the rigors of daily usage while providing dependable performance for years to come.

In conclusion, the Sanyo KS2462R stands out as a compelling option for individuals and businesses looking to enhance their indoor climate control. With its inverter technology, effective cooling capacity, advanced filtration system, user-friendly features, and robust construction, it encapsulates a perfect balance of efficiency, comfort, and reliability.