Remote Control Unit, Dry, Cool, Hour OFF Timer

		Remote Control Unit (continued)

Program button For details, see “Setting theTimer”.
		Press this button to select the mode you want to program.

TIMER SELECT button		No display : The timer does not operate.
				: The air conditioner stops at the set time.
				: The air conditioner stops at the set time.
				: The air conditioner starts at the set time.
				: The air conditioner stops and starts, or starts and stops, at the
					set times every day.

MODE selector button Use this button to select the DRY or COOL mode.
	(DRY)			: The air conditioner reduces the humidity in the room.
(COOL)				: The air conditioner makes the room cooler.

FLAP button Press this button either to select to set the airflow direction to one of the six
		possible positions manually, or to select the sweep function, which moves
		the flap up and down automatically.
				: The airflow direction can be set manually. (six positions)
				: The flap moves up and down automatically.

	NOTE	When you press the FLAP button, the air flow direction will be changed one
		by one as follows.


				Swing


FAN SPEED selector button				: The air conditioner automatically decides the fan speeds.
				: High fan speed
				: Medium fan speed
				: Low fan speed

1 HR. TIMER button				: When you press this button, regardless of whether the unit is
(1-HOUR OFF TIMER)				operating or stopping, the unit operates for one hour and then
				shuts down.
ACL button (ALL CLEAR) Puts the remote control unit into pre-operation status. Always press this
		button after replacing the batteries.

ADDRESS switch		• Change the address switch to prevent mixing of signals from remote control
			units when two Sanyo air conditioners are installed next to each other.
			Normally, the address switch is set to A. When switching the address, the
			remote control must be changed, and the jumper cables on the indoor unit
			board must be cut. For more information, please contact the dealer where
			you made the purchase.

•Normally, the tabs on the remote control unit should not be bent.

SENSOR button When you press this button (use a small-tipped object such as a ballpoint pen), the mark will appear at the display. And the room temperature is detected by the sensor which is built into the indoor unit and the air conditioner is controlled accordingly.

NOTE If the remote control is located near a heat source, such as a space heater or in direct sunlight, press the SENSOR button to switch to the sensor on the indoor unit.

NOTE

The remote control unit sends the temperature signal to the air conditioner regularly at five minute intervals. If the signal from the remote control unit stops for more than ten minutes due to the loss of the remote control unit or other trouble, the air conditioner will switch to the temperature sensor which is built into the indoor unit and control the room temperature. In these cases, the temperature around the remote control unit may differ from the temperature detected at the air conditioner’s position.

OI-508-9EG

KS2462R specifications

The Sanyo KS2462R is a notable air conditioning unit that has garnered attention for its efficient cooling and heating capabilities, making it an ideal choice for various environments, whether residential or commercial. Renowned for its advanced technology and thoughtful design, the KS2462R offers users comfort and energy efficiency.

One of the standout features of the KS2462R is its inverter technology. This innovative system allows the compressor to adjust its speed according to the indoor temperature, resulting in a more consistent and comfortable climate while minimizing energy consumption. By avoiding the frequent cycling on and off typical in traditional systems, the inverter technology not only enhances comfort but also leads to considerable energy savings over time.

Additionally, the Sanyo KS2462R comes equipped with a powerful cooling capacity, enabling it to efficiently cool larger spaces in a short amount of time. The ability to operate at varying speeds ensures that it can maintain the desired temperature while also adapting to changing external conditions. This feature is particularly beneficial during extreme weather conditions, where rapid cooling and heating might be necessary.

Another important characteristic of the KS2462R is its advanced filtration system. This includes a multi-stage filtration process designed to purify the air by trapping dust, allergens, and pollutants. As a result, the air quality in indoor environments becomes significantly improved, promoting a healthier living atmosphere for occupants.

The unit is also designed with user convenience in mind. It features a user-friendly remote control, making it easy to adjust settings from across the room. Furthermore, the quiet operation of the KS2462R ensures that it doesn’t become a distraction, creating a serene environment whether it is being used at home or in an office setting.

Durability and reliability are also hallmarks of the Sanyo KS2462R. Constructed with high-quality materials and components, this air conditioning unit is designed to withstand the rigors of daily usage while providing dependable performance for years to come.

In conclusion, the Sanyo KS2462R stands out as a compelling option for individuals and businesses looking to enhance their indoor climate control. With its inverter technology, effective cooling capacity, advanced filtration system, user-friendly features, and robust construction, it encapsulates a perfect balance of efficiency, comfort, and reliability.

Remote Control Unit (continued)

TIMER SELECT button

(DRY)

(COOL)

FAN SPEED selector button

(1-HOUR OFF TIMER)

ADDRESS switch

KS2462R specifications