Kompernass PAHKS 18V Setting the Cutting Depth, Setting the Cutting Distance / Parallel Guide

Page 8

www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++

SETTING THE CUTTING DEPTH

Please note! If possible we recommend that the cutting depth is set to 5 mm greater than the material thickness. This should help to ensure you achieve a clean cut.

Release the wing nut on the depth adjuster , set the required depth on the scale and retighten the wing nut.

SETTING THE CUTTING DISTANCE / PARALLEL GUIDE

Release the wing screw on the parallel guide , using the marking set it to the required cutting distance and retighten the wing screw.

STATEMENT OF CONFORMITY

We, Kompernaß Handelsgesellschaft mbH, Burgstr. 21, D-44867 Bochum, Germany, hereby declare that this product conforms with the following EC regulations:

Machinery Directive:

(98/37 EEC)

EU Low Voltage Directive:

(73/23 EEC), (93/68 EEC)

Electromagnetic compatibility:

(89/336 EEC), (93/68 EEC)

Description / Model type:

PARKSIDE CORDLESS CIRCULAR SAW PAHKS 18 V

Bochum, 31.08.2003

 

Hans Kompernaß

- Managing Director -

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Pahks 18 Page Page Features of the Pahks 18 Specific Safety AdviceCordless Circular SAW Pahks 18 Proper USEPowerful the Fast Charger Insertion and removal of your battery pack Switching on and OFF Setting the Guide PlateSetting the Cutting Angle OperationStatement of Conformity Setting the Cutting DepthSetting the Cutting Distance / Parallel Guide Warranty
Top Page Image Contents