WSR 1200-PE reciprocating saw
It is essential that the operating instructions are read before the tool is operated for the first time.
Always keep these operating instructions together with the tool.
Ensure that the operating instructions are with the tool when it is given to other persons.
WSR1200-PE operating controls
Blade clamp / blade holder
Function selection switch
Stroke rate regulator
Switch interlock
Control switch
Contents | Page |
General information | 9 |
Description | 9 |
Technical data | 10 |
Safety precautions | 11 |
Preparation for use | 12 |
Operation | 12 |
Sawing | 12 |
Blades and accessories | 13 |
Care and maintenance | 14 |
Warranty | 14 |
Disposal | 15 |
Troubleshooting | 15 |
Declaration of conformity | See cover |
General information
In these operating instructions, this symbol indicates points of particular importance to safety. The instruc- tions at these points must always be observed in order to avoid the risk of serious injury.
Caution: high voltage
The numbers refer to the illustrations. The illustra- tions can be found on the
In these operating instructions, the power tool to which these operating instructions apply is referred to as “the tool”.
Component parts
Type plate
Motor
Gearing section
Clamping lever
Contact shoe
Saw blade
Description
The WSR
The following items are supplied: electric tool, operat- ing instructions, saw blade, toolbox.
The following conditions must always be observed when the tool is in use:
–The tool must be connected to an alternating current electric supply in compliance with the information given on the type plate.
–The tool is for
–The tool must not be used in places where the sur- rounding conditions may present a risk of explosion.
9