Hilti WSR1200-PE operating instructions Technical data, Main features of the tool

Main features of the tool	Class II electrical protection (double insulated) Z (as per EN 50144)
	Anti-vibration system (additional operator protection)
	Mechanical slip clutch (additional gearing protection)
	Vibration-absorbing grip
	Keyless blade clamp
	Saw blade inversion possible
	Keyless contact shoe adjustment
	Infinitely variable stroke rate preselection with speed control switch
	Orbital action
	Constant-speed electronics
	Right of technical changes reserved
The tool is designed for the following uses
Applications	Range of uses
Cutting wood	Cutting openings for door and window frames
	Cutting wood with embedded nails and screws
	Cutting squared timber up to 220 mm thick
	Cutting composites (wood, insulation material, metal)
	Cutting softwoods and hardwoods
	Rip sawing of materials in sheet form
	Cutting concrete forming components to length and to size
Cutting metal	Cutting metal pipes of up to 35 mm dia. to length
	Cutting plastic pipes of up to 150 mm dia. to length
	Cutting openings in metal and plastic pipes
	Cutting composites to length (wood, insulation material, metal)
Demolition	Cutting through metal and plastic pipes
	Cutting through cable trays, ventilation ducts and installation channels

Cutting up sheet metal and sheet metal trays

Cutting through gas concrete blocks

Cutting drywall / plasterboard panels

Technical data

WSR 1200-PE (orbital action / constant-speed electronics)

Nominal power rating	1150 W
Nominal voltage ✱	110 V 220 V	230 V	240 V
Nominal current input ✱	11.7 A 5.6 A	5.4 A	5.2 A
Mains frequency	50–60 Hz
Weight of tool	3.95 kg
Dimensions (l⋅w⋅h)	550⋅95⋅190 mm
Stroke rate	1200–2600/min.
Stroke	32 mm
Stroke rate regulation	Constant-speed electronics with variable stroke rate,
	4 stroke rate settings
Blade clamp	Keyless, for standard / ″ blades
		1	2
Noise (pressure) level	< 92 dB (A)
Typical vibrational acceleration
(weighted)	< 5.0 m/s2 under no load
Orbital action	Selectable

✱ The tool is offered in different versions for various mains voltages. Please refer to the information on the type plate for the nominal voltage and nominal current input of your tool.

10