Kawasaki 840068 instruction manual Symbols, Symbol Name Explanation, Operating Instructions

Use clamps (not included) or other practical ways to secure and support the work piece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.

Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

SYMBOLS

IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.

SYMBOL			NAME	EXPLANATION
		V	Volts	Voltage (Potential)
		A	Amperes	Current
	Hz		Hertz	Frequency (Cycles per Second)
	W		Watt	Power
	Kg		Kilograms	Weight
			Alternating Current	Type of Current
			Direct Current	Type of Current
			Alternating or Direct Current	Type of Current
			Earthing Terminal	Grounding Terminal
			Class II Construction	Denotes Double Insulation
	min		Minutes	Time
		s	Seconds	Time
	￿		Diameter	Size of Drill Bits,
				Grinding Wheels, etc.
			No load speed	No-load Rotational Speed
.../min			Revolutions per Minute	Revolutions, Surface Speed,
				Strokes, etc. per Minute
1,2,3, …			Ring Selector Settings	Speed, Torque or Position Settings

OPERATING INSTRUCTIONS

3 2

4

6

1

5

CONTROLS AND COMPONENTS:		ACCESSORIES:
1.	Trigger Switch	5.	Saw Blades (2)
2.	Lock-On Button	6.	Wrench

3.Blade Clamp

4.Shoe

7 8