Optional Accessories

NOTE:

The accessories listed in this manual are available at an extra cost from your Makita distributor or Makita factory service center. Service centers are listed on the warranty card packed with your tool.

CAUTION:

These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.

An exception: Universal shank jig saw blades with a thickness of 1 mm - 1.25mm (1/32"- 3/64") and a length of 58 mm - 82 mm (2-9/32"-3-7/32").

Circular guide assembly	Guide rule
Part No. 123030-5	Part No. 1641 13-2

*Plastic case Part NO.824418-9

Hex wrench 3

Part No. 783201-2

Jig saw blade (Packed 5 each)

(Note)

Refer t o the next page for "Application" of each blade.