Finishingedges | I |
To trim edges or make slight dimensional |
|
adjustments, run the blade lightly along the |
|
cut edges. |
|
Metal cutting
Always use a suitable coolant (cuttingoil) when cutting metal. Failure to do so will cause significant blade wear. The underside of the workpiece can be greased instead of using a coolant.
Plastic base plate
Use the plastic base plate when cutting de- corative veneers, plastics, etc. It protects sensitive or delicate surfaces from damage. To replace the base plate, remove the four screws.
To reduce the potential for workpiece surface splintering, the
-Screw
Plastic base plate
ase
Anti -spIintering device
10