Makita 4304T, 4305T specifications Vacuum head optional accessory

Page 11

Guide rule (rip fence; optional accessory)

When cutting widths of under 150 mm (5-29/32") repeatedly, use of the guide rule will assure fast, clean, straight cuts. To install it, loosen the bolt on the front of the base. Slip in the guide rule and secure the bolt.

Circular guide (optional accessory)

Use of the circular guide insures clean, smooth cutting of circles under 200" (7-7/8")in radius. Insert the pin through the center hole and secure it with the threaded knob. Move the base of the tool fully forward. Then install the circular guide on the base in the same manner as the guide rule (rip fence).

Guide rule Y

0Threaded knob

Vacuum head (optional accessory)

Vacuum head

The vacuum head is recommended to per-

17-

form clean cutting operations. Install the

plastic cover on the tool by fitting it into

 

the notches in the tool.

 

To attach the vacuum head on the tool, insert the hook of the vacuum head into the hole in the base. The vacuum head can be installed on either left or right side of the base. Then connect a Makita vacuum cleaner to the vacuum head.

11

Image 11
Contents Jig Saw Safety Instructions Minimum Gage for Cord Sets Additional Safety Rules Installing or removing the saw blade Straight line cutting action For 4304T For 4305T Lever Flush cutting Screw Plastic base plate Ase Anti -spIintering device Vacuum head optional accessory Maintenance Accessories Jia saw blade JIG SAW NO. Used JIG SAW Hex Nut M Makita Limitedone Year Warranty
Related manuals
Manual 2 pages 12.25 Kb