SERVICE
21.Tool service must be performed only by qualified repair personnel. Service or main- tenance performed by unqualified personnel may result in a risk of injury.
22.When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury.
SPECIFIC SAFETY RULES |
DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to cordless recipro saw safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury.
1.Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
2.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical out- let.
3.Always use safety glasses or goggles. Ordinary eye or sun glasses are NOT safety glasses.
4.Avoid cutting nails. Inspect workpiece for any nails and remove them before opera- tion.
5.Do not cut oversize workpiece.
6.Check for the proper clearance beyond the workpiece before cutting so that the blade will not strike the floor, workbench, etc.
7.Hold the tool firmly.
8.Make sure the blade is not contacting the workpiece before the switch is turned on.
9.Keep hands away from moving parts.
10.Always switch off and wait for the blade to come to a complete stop before removing the blade from the workpiece.
11.Do not touch the blade or the workpiece immediately after operation; they may be extremely hot and could burn your skin.
12.Some material contains chemicals which may be toxic. Take caution to prevent dust inhalation and skin contact. Follow material supplier safety data.
4