ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
nCarefully remove the tool and any accessories from the box.
nMake sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
18 Volt Reciprocating Saw
Charger
Battery Pack
Saw Blade (3)
Hex Key
Tool Bag
Operator’s Manual
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
TO INSTALL SAW BLADE
See Figure 2.
nLift the blade clamp lock/release lever located on the side of the saw.
nInsert saw blade between blade clamp and saw bar.
nLock the blade clamp lever.
BLADE
BLADE
CLAMP
Fig. 2
9