RIDGID R3001 manual General Cutting, Plunge Cutting

Page 11

OPERATION

WARNING:

Cutting into electrical wiring in walls can cause metal surfaces of the saw to become electrically live. Do not touch metal parts when cutting into a wall; grasp only the insulated gripping surfaces provided on the tool. Make sure hidden electrical wiring, water pipes, and mechanical hazards are not in the blade path when cutting into a wall.

GENERAL CUTTING

See Figure 5.

Hold the saw firmly in front of and clearly away from you. Make sure saw blade is clear of any foreign material. Be sure material to be cut is held firmly. Small workpieces should be securely clamped in a vise or with clamps to the work bench or table.

nMark the line of cut clearly.

nPull variable speed switch to start the cutting action.

nPlace the base assembly against the workpiece, then move the blade into the workpiece.

Do not force. Use only enough pressure to keep the saw cutting. Let the blade and saw do the work. Use of excessive pressure that causes bending or twisting of the blade may result in broken blades.

WARNING:

Hold tool by insulated gripping surfaces when performing an operation where the saw blade may contact hidden wiring or its own card. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.

PLUNGE CUTTING

See Figure 6.

nMark the line of cut clearly.

nChoose a convenient starting point inside the area to be cut out and place the tip of the blade over that point.

nRest front edge of base (shoe) assembly on workpiece and hold firmly in position.

nPull variable speed switch to start the cutting action.

WARNING:

Make sure blade does not touch workpiece until motor reaches full speed, since this could cause loss of control resulting in serious injury.

n With saw blade at full cutting speed, slowly tilt saw

downward until tip of blade starts cutting workpiece.

nAfter blade penetrates workpiece, tilt saw until blade is perpendicular to the workpiece.

Fig. 5

Fig. 6

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Extension Cords ElectricalDouble Insulation Electrical ConnectionFeatures Packing List AssemblyOperation UnpackingTo Change Positions of the Base Assembly To Install BladeBase Assembly Plunge Cutting General CuttingLubrication MaintenanceGeneral Maintenance Metal CuttingBrush Replacement Page HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyVariable Speed Reciprocating SAW

R3001 specifications

The RIDGID R3001 is a versatile and powerful cordless reciprocating saw designed for both professional contractors and DIY enthusiasts. Known for its durability and performance, this tool embodies the quality that RIDGID is synonymous with.

One of the standout features of the R3001 is its robust motor, which delivers impressive cutting speeds and allows users to tackle a variety of materials, from wood to metal. The saw is capable of delivering up to 3,000 strokes per minute, enhancing cutting efficiency and allowing users to complete their tasks faster. Coupled with its 1-1/8-inch stroke length, the R3001 ensures clean and aggressive cuts in even the toughest materials.

The design of the R3001 incorporates an ergonomic handle, providing a comfortable grip that reduces fatigue during prolonged use. The tool is also equipped with an adjustable shoe, allowing users to maximize blade usage and control cutting depths more effectively. This level of precision is crucial for achieving accurate cuts in various applications.

A significant innovation in the R3001 is its tool-free blade change system, which enables quick and hassle-free blade swaps without the need for additional tools. This feature not only saves time but also ensures that users can swiftly adapt to different cutting tasks. The saw is compatible with a wide range of blades, further enhancing its versatility.

Safety is another priority with the RIDGID R3001. The tool comes with a built-in electric brake that stops the blade quickly when the trigger is released, minimizing the risk of accidents. Additionally, it features a lightweight design, which, combined with its balance, makes it easy to maneuver in tight spaces.

The R3001's battery compatibility allows it to work seamlessly with other RIDGID 18V tools, making it a great addition to any toolkit. With features like an integrated LED work light, users can illuminate dark work areas, improving visibility and accuracy during cuts.

In summary, the RIDGID R3001 is a powerful and feature-rich reciprocating saw that excels in versatility, comfort, and safety. Its durable construction and innovative technologies make it an ideal choice for anyone seeking reliability and efficiency in their cutting tasks. Whether for heavy-duty construction work or home improvement projects, the R3001 stands out as a top-tier tool in its category.
Top Page Image Contents