RIDGID R3001 manual Double Insulation, Electrical Connection, Extension Cords

Page 7

ELECTRICAL

DOUBLE INSULATION

Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double insulated tools do not need to be grounded.

WARNING:

The double insulated system is intended to protect the user from shock resulting from a break in the tool’s internal wiring. Observe all normal safety precautions to avoid electrical shock.

NOTE: Servicing of a tool with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service, we suggest you return the tool to your nearest authorized service center for repair. Always use original factory replacement parts when servicing.

ELECTRICAL CONNECTION

This tool has a precision-built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your tool does not operate when plugged into an outlet, double-check the power supply.

EXTENSION CORDS

When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriter’s Laboratories (UL) should be used.

When working outdoors with a tool, use an extension cord that is designed for outside use. This type of cord is designated with “WA” on the cord’s jacket.

Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.

**Ampere rating (on tool faceplate)

 

0-2.0

2.1-3.4

3.5-5.0

5.1-7.0 7.1-12.0

12.1-16.0

Cord Length

Wire Size (A.W.G.)

 

 

 

 

 

 

 

 

 

25'

16

16

16

16

14

14

 

 

 

 

 

 

 

50'

16

16

16

14

14

12

 

 

 

 

 

 

 

100'

16

16

14

12

10

—

**Used on 12 gauge - 20 amp circuit. NOTE: AWG = American Wire Gauge

WARNING:

Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury.

WARNING:

Check extension cords before each use. If damaged replace immediately. Never use tool with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area General Safety RulesElectrical Safety Personal SafetyService Specific Safety RulesSymbol Name DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Extension Cords ElectricalDouble Insulation Electrical ConnectionFeatures Packing List AssemblyOperation UnpackingBase Assembly To Install BladeTo Change Positions of the Base Assembly Plunge Cutting General CuttingLubrication MaintenanceGeneral Maintenance Metal CuttingBrush Replacement Page HOW to Obtain Service What is not Covered WarrantyDAY Satisfaction Guarantee Policy What is Covered Under the 3 Year Limited Service WarrantyVariable Speed Reciprocating SAW

R3001 specifications

The RIDGID R3001 is a versatile and powerful cordless reciprocating saw designed for both professional contractors and DIY enthusiasts. Known for its durability and performance, this tool embodies the quality that RIDGID is synonymous with.

One of the standout features of the R3001 is its robust motor, which delivers impressive cutting speeds and allows users to tackle a variety of materials, from wood to metal. The saw is capable of delivering up to 3,000 strokes per minute, enhancing cutting efficiency and allowing users to complete their tasks faster. Coupled with its 1-1/8-inch stroke length, the R3001 ensures clean and aggressive cuts in even the toughest materials.

The design of the R3001 incorporates an ergonomic handle, providing a comfortable grip that reduces fatigue during prolonged use. The tool is also equipped with an adjustable shoe, allowing users to maximize blade usage and control cutting depths more effectively. This level of precision is crucial for achieving accurate cuts in various applications.

A significant innovation in the R3001 is its tool-free blade change system, which enables quick and hassle-free blade swaps without the need for additional tools. This feature not only saves time but also ensures that users can swiftly adapt to different cutting tasks. The saw is compatible with a wide range of blades, further enhancing its versatility.

Safety is another priority with the RIDGID R3001. The tool comes with a built-in electric brake that stops the blade quickly when the trigger is released, minimizing the risk of accidents. Additionally, it features a lightweight design, which, combined with its balance, makes it easy to maneuver in tight spaces.

The R3001's battery compatibility allows it to work seamlessly with other RIDGID 18V tools, making it a great addition to any toolkit. With features like an integrated LED work light, users can illuminate dark work areas, improving visibility and accuracy during cuts.

In summary, the RIDGID R3001 is a powerful and feature-rich reciprocating saw that excels in versatility, comfort, and safety. Its durable construction and innovative technologies make it an ideal choice for anyone seeking reliability and efficiency in their cutting tasks. Whether for heavy-duty construction work or home improvement projects, the R3001 stands out as a top-tier tool in its category.
Top Page Image Contents