RIDGID R884 manual Assembly, Operation, Unpacking, Packing List, Applications

Page 9

ASSEMBLY

UNPACKING

This product has been shipped completely assembled.

Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

Inspect the tool carefully to make sure no breakage or damage occurred during shipping.

Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

If any parts are damaged or missing, please call 1-866-539-1710 for assistance.

PACKING LIST

MaxSelectReciprocating Saw

Saw Blades (2)

Operator’s Manual

WARNING:

If any parts are damaged or missing, do not operate this tool until the parts are replaced. Failure to heed this warning could result in serious personal injury.

WARNING:

Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.

OPERATION

WARNING:

Do not allow familiarity with your tool to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

WARNING:

Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.

APPLICATIONS

You may use this tool for the purposes listed below:

Cutting all types of wood products (lumber, plywood, paneling, composition board, and hard wood)

Cutting masonite and plastic

Cutting drywall

Cutting metals such as sheet steel, pipe, steel rods, aluminum, brass, and copper

9

Image 9
Contents OPERATOR’S Manual Introduction Table of ContentsWork Area Safety General Safety RulesElectrical Safety Personal SafetySpecific Safety Rules Battery Tool USE and CareService Safety Rules for Charger Important Safety InstructionsName DESIGNATION/EXPLANATION SymbolsSymbol Signal Meaning Features Operation AssemblyUnpacking Packing List24v Charging a HOT Battery Pack Charge Level IndicatorCharging a Cool Battery Pack To ChargeLED Function of Ridgid 24V LITHIUM-ION Charger LED Battery RED Green Action Indicator PackLED Function of Ridgid NICKEL-CADMIUM Chargers To Remove Battery Pack To Install Battery PackSwitch Trigger Changing Positions of the Shoe AssemblyTo Install SAW Blade General CuttingPlunge Cutting Metal Cutting General Maintenance MaintenanceBattery Pack Removal and Preparation for Recycling BatteriesDAY Satisfaction Guarantee Policy WarrantyWhat is Covered Under the 3 Year Limited Service Warranty HOW to Obtain Service What is not CoveredPage Customer Service Information