Features

PRODUCT SPECIFICATIONS

Length of Stroke	...................................................1-3/16 in.
Switch	Variable Speed
Charger Input	120 V, 60 Hz, AC only

24V LITHIUM-ION BATTERY PACK
Strokes Per Minute	0-2,500 s/min. (SPM)
Motor	24 Volt DC
18V NICKEL-CADMIUM BATTERY PACK
Strokes Per Minute	0-1,900 s/min. (SPM)
Motor	18 Volt DC

SWITCH

TRIGGER

	BASE (SHOE)	LOCK-OFF
		BUTTON
	ASSEMBLY

SAW

BLADE

SHOE

RELEASE LEVER

BLADE CLAMP

LOCK / RELEASE LEVER

Fig. 1

KNOW YOUR RECIPROCATING SAW

See Figure 1.

The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.

BASE (SHOE) ASSEMBLY

The shoe assembly can be adjusted forward or backward to take advantage of the unused portion of the blade, or for special jobs requiring low blade clearance.

BLADE CLAMP LOCK / RELEASE LEVER

Your saw has a blade clamp design that does not require the use of a tool (blade wrench) when installing or removing the blade.

LOCK-OFF BUTTON

Your saw is equipped with a “lock-off” button which reduces the possibility of accidental starting. The lock-off button is located on the handle above the switch trigger.

VARIABLE SPEED

The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.