Ryobi P510 General Maintenance, Batteries, Battery Pack Removal Preparation for Recycling

Page 14

MAINTENANCE

WARNING:

When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.

WARNING:

To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at a Ryobi Authorized Service Center.

BATTERIES

The battery pack for this tool is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.

The batteries in this tool have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

nRemove the battery pack from the charger once it is fully charged and ready for use.

For battery storage longer than 30 days:

nStore the battery pack where the temperature is below 80°F.

nStore battery packs in a "discharged" condition.

BATTERY PACK REMOVAL AND

PREPARATION FOR RECYCLING

To preserve natural resources, please recycle or dispose of batteries

properly.

This product contains nickel-cadmium

batteries. Local, state or federal laws

may prohibit disposal of nickel-cadmium batteries in ordinary trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

WARNING:

Upon removal, cover the battery pack’s termi- nals with heavy-duty adhesive tape. Do not at- tempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

14

Image 14
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionPersonal Safety General Safety RulesElectrical Safety Work AreaSpecific Safety Rules ServiceSafety Rules for Charger Symbols Symbol Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Features Product SpecificationsLOCK-OFF Button Switch TriggerKnow Your Reciprocating SAW Variable SpeedUnpacking AssemblyTo Install SAW Blade Packing ListOperation Charging the Battery PackCharging a Cool Battery Pack ApplicationsCharging a HOT Battery Pack To Remove / Attach Battery PackGeneral Cutting Battery Pack Removal Preparation for Recycling MaintenanceGeneral Maintenance BatteriesPage Service Model NO. and Serial no