Chicago Electric 69684 owner manual Replacing the Blade, Operating Instructions

Page 10

SAFETY

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

TOOL SET UP

TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:

Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section.

TO PREVENT SERIOUS INJURY: DO NOT OPERATE WITH ANY GUARD DISABLED, DAMAGED, OR REMOVED. Moving guards must move freely and close instantly.

Replacing the Blade

SETUP

OPERATION

MAINTENANCE

1.Unplug the tool from its power source.

2.Raise the Lower Guard (133) out of the way and hold it up.

3.Loosen the Guard Pivot Bolt (193) until it disengages the Guard Pivot Plate (132).

4.Swing the Guard Pivot Plate up and out of the way.

5.Press in the Spindle Lock (150) on the back of the saw′s head and hold it in.

Spindle

Lock

Figure A

6.Remove the Spindle Bolt* (77) and Outer Flange (78), see Figure B.

*IMPORTANT: The Spindle Bolt has a left‑handed thread and removes by turning CLOCKWISE.

Note: Make sure the Inner Flange (81) stays in place on the Spindle.

Figure B

7.Remove the Blade (80) and Arbor Insert (79). Place the Arbor Insert into a new Blade and install the new Blade. Make sure that the Blade's rotation arrow points in the same direction as the rotation arrow on the Upper Guard (98).

8.Replace the Outer Flange and Spindle Bolt. Position the cupped side of the Flange against the blade. Hold in the Spindle Lock (150) and

wrench tighten the Spindle Bolt by turning it COUNTERCLOCKWISE. Release the Spindle Lock.

9.Rotate the Guard Pivot Plate (132) back into place, and secure it with the Guard Pivot Bolt (193).

10.WARNING! Make sure the Lower Guard (133) operates smoothly and properly protects from the Blade before using the saw.

Page 10

For technical questions, please call 1-800-444-3353.

Item 69684

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Miter SAW Table of Contents General Tool Safety Warnings Outlets for 2-Prong Plug Miter Saw Safety WarningsGrounding Instructions See Outlets for 2-Prong PlugVibration Safety Specifications 216045Setup Before Use AssemblyMounting Lock Trigger Lower Guard Blade Clamp Turntable FunctionsMiter Description of Selected Functions Head Lock-downReplacing the Blade Operating InstructionsAdjusting the Bevel Angle Using the Workpiece Extension SupportsAdjusting the Miter Angle Bevel IndicatorUsing the Depth Stop Workpiece and Work Area Set UpGeneral Operating Instructions If Fence needs adjustment Cleaning, Maintenance, and LubricationMaintenance and Servicing Checking and Calibrating the FenceTo adjust the Kerf Board Calibrating the Miter Table IndicatorAdjusting or Replacing the Kerf Board Calibrating the Bevel AngleTroubleshooting Problem Possible Causes Likely SolutionsParts List and Diagram Parts ListRecord Product’s Serial Number Here 111 Assembly Diagram Limited 90 Day Warranty Mission Oaks Blvd. PO Box 6009 Camarillo, CA 93011 800

69684 specifications

The Chicago Electric 69684 is a portable generator renowned for its reliable performance and essential features tailored for both home and outdoor use. This generator is particularly popular among DIY enthusiasts, campers, and homeowners looking for a dependable backup power solution during outages.

One of the standout features of the Chicago Electric 69684 is its robust 8750 watts peak output and 7000 watts running output, which provide ample power for various electrical devices. This makes it suitable for powering essential home appliances, tools, and recreational equipment. The generator is equipped with a 420cc OHV engine that promises durability and fuel efficiency, ensuring it operates effectively under demanding conditions.

The design of the Chicago Electric 69684 emphasizes user-friendliness and portability. Weighing approximately 150 pounds, it comes with built-in wheels and a foldable handle, enabling easy transport and maneuverability, whether you are moving it around the home or taking it on outdoor adventures. Its compact size allows for easy storage in garages or sheds without taking up too much space.

The generator features a durable steel frame that enhances its longevity and withstands rugged environments. Moreover, its low oil shutdown technology protects the engine, ensuring longevity and minimizing maintenance efforts. This feature automatically turns off the generator when oil levels are too low, preventing damage and encouraging responsible fuel management.

Users will appreciate the multiple outlets available on the Chicago Electric 69684. It includes standard 120V household outlets as well as 120/240V twist-lock outlets, making it versatile for various applications. The inclusion of a circuit breaker also helps protect connected devices from overloading, adding an extra layer of safety.

The noise level of the Chicago Electric 69684 is comparable to that of other generators in its class, making it a practical choice for residential areas. Although it generates a significant amount of power, it operates at a relatively low decibel level, allowing users to enjoy a quieter environment during usage.

Additionally, the generator is designed with fuel efficiency in mind, allowing for extended run times on a single tank. This feature is particularly advantageous for users who require consistent power without frequent refueling interruptions.

In conclusion, the Chicago Electric 69684 portable generator stands out with its powerful performance, user-friendly design, and safety features, making it a valuable addition for anyone in need of reliable backup power or outdoor electrical supply. Its blend of durability, efficiency, and portability ensures that it meets a wide range of power needs effectively.
Top Page Image Contents