The Power Switch:
1.To start the Circular Saw, depress the Safety Switch with your thumb, and then the Power Switch (part #67). To stop the tool, release pressure on the Power Switch. (See Figure I.)
2.WARNING! Prior to using the Circular Saw (each time), make sure the Switch Lock mechanism is working properly. Always release the Switch Lock mecha- nism before disconnecting the Saw from its electrical outlet. Failure to do so will cause the tool to start immediately the next time it is plugged into an electrical outlet, resulting in possible injury or property damage. (See Figure I.)
SAFETY SWITCH LOCK 
POWER SWITCH (#67)
AUXILIARY HANDLE (#44) |
|
|
| HANDLE (#60, #68) |
| ||||
|
|
SAW BLADE (#3) 
FIGURE I
Proper Operation During The Sawing Process:
1.
WARNING When sawing a workpiece, always push the Circular Saw into
the workpiece with one hand firmly gripping the Handle (parts #60, #68) and the other hand firmly gripping the Auxiliary Handle (part #46). Never pass hands or fingers directly in front of, to the rear, or below the Saw Blade (part #3).
(See Figure I.)
2.Make all necessary depth and angle adjustments to the Circular Saw.
(See Figures G and H.)
3.Make sure the workpiece is free from nails and any other foreign objects which could damage the Saw Blade (part #3). (See Figure I.)
SKU 90186 | PAGE 13 |