Delta MS275 instruction manual Accessories, Warranty

Page 20

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or

for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

WARRANTY

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

20

Image 20
Contents Compound Power Miter Saw Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules Do not Perform FREE-HAND Operations Additional Specific Safety RulesNever Recut Small Pieces Grounding Instructions Power ConnectionsMotor Specifications Carton Contents Assembly Unpacking and CleaningAssembly Tools Required Rotating the TableFastening the Machine to the Supporting Surface Rear SUPPORT/STABILIZER & Carrying HandleWork Clamp Table Extension WingsDust BAG Locking the Switch in the OFF Position OperationStarting and Stopping the Miter SAW Pointer and ScaleTilting the Cuttinghead for Bevel Cutting Adjusting the Downward Travel of the SAW BladeDisconnect the Machine from Power Source Adjusting the 90 and 45 Bevel Stops Adjusting the Table Positive StopsHazard Zone Helpful HintsAuxiliary Wood Fence Cutting Bowed MaterialRight Wrong SawhorsesGeneral Cutting Operations Cutting AluminumCutting Crown Moulding Crown Moulding Other AnglesTroubleshooting Maintenance Changing the BladeService Brush Inspection and ReplacementAccessories WarrantyCanadian PORTER-CABLE Delta Service Centers