INSTALLING OR REMOVING BATTERY PACK
TO INSTALL BATTERY PACK: Align rails (A) Fig. 4, on battery pack with slots on tool and push battery pack onto tool until it locks in place.
TO REMOVE BATTERY PACK:
Depress the battery release button
(B)Fig. 4, and pull battery pack out of tool.
A 
B
Fig. 4
ASSEMBLY
BLADE INSTALLATION
1.Raise the blade guard (A) Fig. 5 by lifting up on tab (B).
2.Depress button (C) Fig. 6, and gently squeeze the switch trigger (D) until the blade shaft moves slowly and stop the motor when the blade shaft is at or near the bottom of its stroke as shown in Fig. 7.
3. 
REMOVE BAT-
TERY PACK.
B
A
Fig. 5
C 
D
Fig. 6
4.Loosen the two screws (F) Fig. 7 on the blade shaft.
F
Fig. 7
8