05 MP3 OPERATIONS
SEARCH FUNCTIONS (FILE SEARCH EXAMPLE)
If the structure of Disc above does MP3 TOC, it is as follows...
Total Directories: 4
Total Song: 7
Directories to have MP3 file: 3 (A, C, D)
We regard directories as MP3 file. When operating it is located as A ► C ► D ► A ►… To listen to a song from MP3 (On Normal play)
1)Press the BAND/SEARCH button (10) for 2 times. File search mode will be displayed.
2)Press SEL/MENU/ENT button (3). "A" directory will be displayed.
3)Press MENU Down button (5) for 2 times. "D" directory display. (If BAND/SEARCH button (10) is pressed for more than 0.5 sec, first song in “D” dir. “e” file will start to play).
4)Press SEL/MENU/ENT button (3). "e" file display.
5)Press MENU Down button (5). "f" file display.
6)Press SEL/MENU/ENT button (3). "f.MP3" file will start to play.
7)If SEL/MENU/ENT button (3) is pressed after MENU Down button (5) has been pressed for once. "C" file will be displayed.
01 INSTALLATION
1
6
7
4
2 5
3
(Fig. 2)
1.Dashboard
2.Nut (5mm)
3.Spring Washer
4.Screw (5 x 25mm)
5.Screw
DIN
1
2
4
5
3
2
5
8
(Fig. 3)
6. Strap
Be sure to use the strap to secure the back of the unit in place. The strap can be bent by hand to the desired angle.
7.Plain Washer
8.Fix the springs on each side.
Fastening the unit to the factory radio mounting bracket.
1.Select a position where the screw holes of the bracket and the screw holes of the main unit become aligned (are fitted), and tighten the screws at 2 places on each side. Use either truss screws
(5 x 5mm) or flush surface screws (4 x 5mm), depending on the shape of the screw holes in the bracket.
2.Screw
3.Factory radio mounting bracket
4.Dashboard or Console
5.Hook (Remove this part)
NOTE: The mounting box, outer trim ring, and
Page 10 | Page 03 |