03 GENERAL OPERATIONS
04 RADIO & CD OPERATIONS
SET THE CLOCK
Press DSP button (9) to recall clock time display, then press and hold this button for several seconds until the time is blinking.
And press Vol Up button (4) to adjust hours and Vol Down button (5) to adjust minutes.
SELECT MENU/MODE
Press SEL button (3) to move display through Volume, Bass, Treble, Balance and Fader (opt.) functions. Use Vol Up (4) and Vol Down (5) buttons to adjust the selected mode. When mode has not been adjusted for several seconds, display returns
Press and hold SEL/MENU button (3) for one second to move display through "EQ, ESP, Loud, Beep, Stereo/Mono". When mode has not been adjusted for several seconds, display return to normal radio or CD mode.
EQ 
ESP 
LOUD 
BEEP 
STEREO/MONO
And then use VOL Up (4) and Vol Down
(5)buttons to adjust the selected mode as follows:
EQ: POP, ROCK, CLASSIC, FLAT, DSP OFF
ESP: ESP 12' or ESP 45'
Loud: Loud On or Loud Off
RADIO OPERATIONS
BAND |
|
|
| LOCAL/DISTANT | ||||
Press BAND button (10) to change bands | Press the LOC button (12) to select | |||||||
as below: |
|
|
| between local setting for reception of strong | ||||
|
| FM |
|
| AM |
|
| station and distant setting for reception of |
|
|
|
|
|
| weak station when tuning. This function | ||
| ||||||||
|
|
|
|
| ||||
|
|
|
|
|
|
|
| operates in FM band only. |
SELECT STATION |
|
|
| |||||
|
|
|
| |||||
Rotate TUNING knob (11) clockwise or |
| |||||||
anticlockwise to adjust the frequency |
| |||||||
upward or downward. |
|
|
|
| ||||
to normal radio or CD display.
VOL 
BAS 
TRE 
BAL
(Volume) (Bass) (Treble) (Balance)
OPTIONAL:
VOL 
BAS 
TRE 
BAL 
FAD
(Volume) (Bass) (Treble) (Balance) (Fader)
When switching modes with SEL button
(3), "Bass" and "Treble" will not be shown if any EQ mode has been enabled.
VOLUME
Press SEL button (3) for 1 time. Adjust volume level by using VOL Up (4) and VOL Down (5) buttons.
BASS
For 2 time. Adjust bass level by using VOL Up (4) and VOL Down (5) buttons.
TREBLE
Beep: Beep On or Beep Off
Stereo/Mono: Stereo or Mono
LIQUID CRYSTAL DISPLAY
The LCD (19) can show the current state of the unit.
FRONT PANEL RELEASE
Press REL button (2) to detach the removable front panel.
FLASHING LED
If the front panel is not on the main unit, LED (20) will be flashing.
RESET BUTTON FUNCTION RESET button (21) is placed on the housing and must be activated with either a ballpoint pen or thin metal object. The RESET button (21) is to be activated for
CD OPERATIONS
DISC PLAY
Gently insert a CD with the label side facing up into the Disc Slot (16). The CD is then automatically loaded into the unit and starts playing with the first track of the disc. The digital display will indicate the track number and the time of the track.
EJECT
Press Eject button (15) to stop CD playback and eject CD from the slot. Receiver switches to radio operation.
PLAY THE FIRST TRACK
Press and hold Play/Pause button (14) for several seconds to play the first track of the current disc.
PAUSE CD
FAST FORWARD/FAST REVERSE Hold Track Forward button (17) or Track Reverse button (18) for several seconds to fast forward or fast reverse. Releasing the button to stop fast forward and fast reverse playback.
REPEAT
Press RPT button (12) to continuously repeat playing the current track. Press it again to cancel the function.
INTRO:
PREVIEW ALL TRACKS
Press INT button (7) to play first several seconds for each track. Press it again to stop intro and back to normal playback.
RANDOM:
For 3 times. Adjust treble level by using VOL Up (4) and VOL Down (5) buttons.
BALANCE
For 4 times. Adjust sound balance between left and right speakers by using VOL Up (4) and VOL Down (5) buttons.
FADER (optional)
For 5 times. Adjust sound balance between front and rear speakers by using VOL Up
(4) and VOL Down (5) buttons.
the following reasons:
·Initial installation of the unit when all wring is completed.
·All the function buttons do not operate.
·Error symbol on the display.
Press Play/Pause button (14) to temporarily stop the playback. Press it again to resume playback.
SKIP TRACKS
Press Track Forward button (17) or Track Reverse button (18) to choose the following track or the previous track. Track numbers will be shown on display.
RANDOM TRACKS PLAYBACK
In CD playback mode. Press RDM button
(8)to play all tracks in the random order. Press it again to cancel the function.
Page 06 | Page 07 |