Introduction
The following icons / symbols are used in this instruction manual:
Read instruction manual! | Keep children away from electrical | |
power tools! | ||
| ||
Observe caution and safety notes! | For indoor use only! | |
Caution – electric shock! | Check that the device, mains lead | |
Danger to life! | and plug are in good condition! | |
Explosive material! |
|
4 | Bit garage | |
PABS 10.8 A1 |
| Direction of rotation switch/lock |
5 | ||
| 6 | ON / OFF switch |
| 7 |
Introduction
Before you use it for the first time, it is es- sential that you make yourself fully familiar
with the functions of the appliance and find out how to correctly handle electrically powered tools. Read the following directions for use as well as the safety instructions. Keep these instructions. When handing the device on to a third party, hand these instructions on, too.
8Battery pack
9Battery unlocking button
10 Light
11 Torque control / drill step
12
13 Power supply unit
14 Status LED red
15 Battery charge status indicator green
16 Charging cap
Intended purpose
This appliance is designed for drilling and screwing into wood, plastic and metal. Use the appliance only as described and only for the purposes indicated.
Any other uses, and modifications to the appliance, are deemed to be improper usage and may result in serious physical injury. The manufacturer accepts no responsibility for damage(s) resulting from improper usage. The appliance is not intended for commercial use.
Equipment Components
1Gear selector switch
2Button for rechargeable battery LED
3Rechargeable battery LED (status indication)
Items supplied
1Cordless drill driver PABS
1Rechargeable battery pack PABS
1Power supply unit PABS
2 Bits in bit garage
1Carry case
1Directions for use
Technical Data
Nominal voltage: 10.8 V
Drill chuck |
|
clamping range: | max. 10 mm |
6GB/IE