Parkside PABS 10.8 A1 manual Workplace safety

Page 6

Introduction / General safety advice for electrical power tools

Maximum

 

drill diameter:

 

Steel:

8 mm

Wood:

20 mm

Rechargeable battery pack PABS 10.8-A1-1:

Type:

LITHIUM-ION

Nom. voltage:

10,8 V

 

 

 

Capacity:

1300 mAh

Power supply unit PABS 10.8 -LI-2:

INPUT:

Nominal voltage:

230 V ~ / 50 Hz

OUTPUT:

 

 

 

Nominal voltage:

12 V

 

 

 

Rated current:

0.6 A

Charging time:

approx. 3 hours

Noise / vibration data:

Measured values for noise are determined in accord- ance with EN 60745. The A-weighted noise level of the electrical power tool are typically:

Sound pressure level:

70 dB(A)

Sound power level:

80 dB(A)

Uncertainty K:

3 dB

Wear ear protection!

Total vibration (vector sum of three directions) is calculated in accordance with EN 60745:

Drilling in metal:

Vibration emission value

 

ah, D= 1.944 m / s2,

 

uncertainty K= 1.5 m / s2,

Screwing:

Vibration emission value

 

ah= 2.101 m / s2,

 

uncertainty K= 1.5 m / s2.

WARNING! The vibration level given in these instructions has been measured in accordance with a standardised measurement procedure specified in EN 60745 and can be used to compare devices. Different uses of the device give rise to different vibration levels and in many cases they may exceed

the values given in these instructions. It is easy to underestimate the vibration load if the electrical power tool is used regularly in particular circumstances.

Note: If you wish to make an accurate assessment of the vibration loads experienced during a particular period of working, you should also take into account the intervening periods of time when the device is switched off or is running but is not actually in use. This can result in a much lower vibration load over the whole of the period of working.

General safety advice for electrical power tools

WARNING! Read all the safety advice and instructions! Failure to observe the safety advice and instructions may result in electric shock, fire and / or serious injury.

Keep all the safety advice and instructions in a safe place for future reference!

The term “electrical tool” used in the safety advice refers to electrical tools powered by mains electrici- ty (by means of a mains lead) and electrical tools powered by rechargeable batteries (without a mains lead).

1. Workplace safety

a)Keep your working area clean and well lit. Untidy or poorly lit working areas can lead to accidents.

b)Do not work with the device

 

in potentially explosive envi-

 

ronments in which there are

 

inflammable liquids, gases or dusts.

 

Electrical power tools create sparks, which can

 

ignite dusts or fumes.

c)

Keep children and other

 

people away while you are

 

operating the electrical tool.

 

Distractions can cause you to lose control of

 

the device.

GB/IE

7

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LITHIUM-ION Cordless Drill Pabs 10.8 A1 GB / IE Page Table of contents Intended purpose Technical DataIntroduction Equipment ComponentsWorkplace safety Personal safety General safety advice for electrical power toolsElectrical safety Careful handling and use of electrical power toolsUse and handling of the cord- less electrical power tool Safety advice relating to cordless drill driversWear safety glasses and a dust mask Checking the battery status Original ancillaries / accessoriesRemoving / charging / inserting rechargeable battery pack Before first useBefore first use / Preparing the tool for use Soft screw bed Cleaning and MaintenanceService Warranty Drilling in woodWarranty / Disposal DisposalDeclaration of Conformity / Manufacturer EN 61000-6-32007, ENAllgemeine Sicherheitshinweise für Elektrowerkzeuge InhaltsverzeichnisEinleitung Vor der InbetriebnahmeBestimmungsgemäßer Gebrauch Lieferumfang EinleitungLithium-Ionen-Akkubohrschrauber AusstattungSchalldruckpegel Arbeitsplatz-SicherheitAusgang / Output Nennspannung Nennstrom Ladedauer Ca Std Unsicherheit K Gehörschutz tragenSicherheit von Personen Allgemeine Sicherheitshinweise für ElektrowerkzeugeElektrische Sicherheit Zweckentfremden Sie dasVerwendung und Behandlung des Elektrowerkzeugs Verwendung und Behandlung des AkkuwerkzeugsOriginalzubehör / -zusatzgeräte Sicherheitshinweise Für Akku-BohrschrauberAchtung Leitungen Akku-Pack entnehmen / laden / einsetzenVor der Inbetriebnahme / Inbetriebnahme Tipps und Tricks Inbetriebnahme / Wartung und ReinigungSperre aktivieren Wartung und ReinigungGarantie Service / Garantie / EntsorgungService EntsorgungEntsorgung / Konformitätserklärung / Hersteller Konformitätserklärung HerstellerKompernass Gmbh

PABS 10.8 A1 specifications

The Parkside PABS 10.8 A1 is a versatile and compact cordless drill that stands out in its category, designed to meet the needs of both DIY enthusiasts and professionals alike. Featuring a powerful 10.8V lithium-ion battery, it ensures reliable performance and extended usage time without the hassles of cords or power outlets.

One of the main features of the Parkside PABS 10.8 A1 is its lightweight design. Weighing just a few kilograms, this drill offers an ergonomic grip that allows users to operate it comfortably for prolonged periods. The compact size makes it easy to maneuver in tight spaces, making it an ideal choice for intricate projects or overhead tasks.

The drill is equipped with a two-speed gearbox that enables users to switch between high torque settings for drilling into tougher materials and higher speeds for quick work on softer surfaces. This versatility allows for a wide range of applications, from assembling furniture to drilling into wood, metal, and plastic.

Another significant advantage of the Parkside PABS 10.8 A1 is its integrated LED work light. This feature illuminates the workspace, providing better visibility in dimly lit areas. Whether working in a garage, attic, or outdoors during early morning or late evening, this user-friendly addition enhances safety and precision.

The drill also boasts a 10mm keyless chuck, enabling users to change drill bits swiftly and effortlessly. This chuck accommodates a variety of bit sizes, making it suitable for different tasks, from drilling to screwing.

In terms of technology, the Parkside PABS 10.8 A1 incorporates an intelligent electronic control system, ensuring consistent power delivery and preventing battery overload. Additionally, the lithium-ion battery technology used in this model offers advantages such as minimal self-discharge and no memory effect, ensuring that the drill is always ready for use.

Safety remains a top priority, with the device featuring an automatic brake that halts rotation immediately after the trigger is released. This prevents accidents and enhances user control.

With these features and technologies, the Parkside PABS 10.8 A1 stands out as a reliable, powerful, and easy-to-use tool that addresses the needs of contemporary users, making it a valuable addition to any toolkit. Whether for home improvements or professional projects, this drill delivers exceptional performance that will not disappoint.
Top Page Image Contents