Ingersoll-Rand 8670-( )-3( ), 8670-( )-1( ) manual

Page 17

# 3 PORT (EXHAUST)

REMOTE VALVE

I

(DUPLICATE FOR REMOTE RETRACT CIRCUIT, EXCEPT USE MODEL 461-2 PALM VALVE WITH RED BUTTON)

WHEN MORE THAN EIGHT (6 TOOLS ARE REQUIRED PROVIDE ANOTHER 29192 VALVE AND 37750 MANIFOLD. THE SECOND SET OF TOOLS CAN BE ACTUATED FROM THE SAME 3-WAY PALM VALVE.

Image 17
Contents SELF-FEED Drill Valve Section Model IdentificationMounting SET-UP ProcedureAIR and Lube Requirements MaintenanceDisassembly and Assembly of Tools M105 Gearing Section DisassemblyAssembly POSlTlON Bearings with Shielded Side AS Shown Valve Section Motor AssemblyMotor Section Valve Assembly Housing and Valve Section Typical Cross Section of Tool SET-UP Procedures AccessoriesHydraulic Check Mounting InstructionsSpanner Wrench SET-UP ProcedureDouble Hydraulic Check Assemblies Foot Mount Assembly Nose Housing Tool Is designed Todeliver Recommended Power AIR Inlet SystemRemote Operation Basic Remote Control for Start Emergency Retract FunctionsPage Maintenance Tool Furnished with Each Model Trouble ShootingTool Retracted Port Service KIT no