ADDITIONAL SAFETY RULES
FOR CHARGER & BATTERY CARTRIDGE
1.Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF).
2.Do not attempt to use a
3.Do not allow anything t o cover or clog the charger vents.
4.Do not short the battery cartridge. A battery short can cause a large current flow, overheating, possible burns and even a breakdown.
5.Do not store the tool and Battery Cartridge in locations where the tempera- ture may reach or exceed 5OoC (122OF).
6.Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.
ADDITIONAL SAFETY RULES
FOR CORDLESS ANGLE DRILL
1.Be aware that this tool is always in an operating condition, because it does not have to be plugged into an electrical outlet.
2.Always be sure you have a firm footing.
Be sure no one is below when using the tool in high locations.
3.Hold the tool firmly.
4.Keep hands away from rotating parts.
5.When drilling into walls, floors or wherever "live" electrical wires may be en- countered, DO NOT TOUCH ANY METAL PARTS OF THE TOOL!
Hold the tool only by the plastic handle or plastic tool body t o prevent electric shock if you drill into a "live" wire.
6.Do not leave the tool running. Operate the tool only when
7.Do not touch the drill bit or the workpiece immediately after operation, they may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
5