Makita DA3000DW instruction manual LChuck key

Installing and removing bit

CAUTION :

Be sure that the battery cartridge has been removed from the tool.

.To install the drill bit, place it in the chuck as far as it will go. Tighten the

chuck collar by hand. Place the chuckTighten key in each of three holes, and tighten

clockwise.

To remove the drill bit, place the chuck key into the chuck hole and turn counter- clockwise.

CAUTION:

Always set the Forward-Reverseswitch lever to NEUTRAL when installing, removing or adjusting bits or accessories.

LChuck key

7