Makita BHP456(LXPHOL*1) dimensions Speed change lever, F/R Change lever

Page 8

P 8/10

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-3. Speed change lever

ASSEMBLING

Assemble Speed change lever to Gear assembly. (Fig. 14)

Fig. 14

1.Be sure to put two Compression springs on the back of Speed change lever.

Compression springs

2.Mount Speed change lever to Gear assembly.

Note: Be sure to fit the hook of Gear assembly in Speed change lever.

hook

3.Set Speed change lever to either Low speed side or High speed side.

Low speed side

High speed side

Gear assembly

[3]-4. F/R Change lever

Mount F/R Change lever on Switch before assembling Housing (R) to Housing (L). (Fig. 15)

Fig. 15

fork portion

Engage the fork portion

F/R Change lever

with the projection of Switch.

projection

Image 8
Contents Specification Standard equipment Optional accessoriesDisassembling RepairDrill chuck Assembling Gear assembly and Motor section Brush holder complete Correct Wrong CorrectWrongDISASSEMBLY/ASSEMBLY Speed change lever F/R Change leverCircuit diagram Fig. D-1Wiring diagram Fig. D-2