P 7/10
Repair
[3] DISASSEMBLY/ASSEMBLY
[3]-2. Gear assembly and Motor section (cont.)
ASSEMBLING
(5)Engage the notch of Yoke unit with the projection inside of Housing (L) when mounting the assembly of Gear section and Motor section to Housing (L). (Fig. 12)
Fig. 12
Engage the notch of Yoke unit with the projection inside of Housing (L).
projection for fitting to the notch
Housing (L)
Yoke unit
notch
(6)Adjust the assembly of Motor section and the Gear section to the correct position in Housing (L) so as to assemble Housing (R) to Housing (L) smoothly and exactly. (Fig. 13)
Fig. 13
This rib must be fit in
the groove of Change ring.
90 degrees | Yoke unit must be mounted | |
within these ribs. | ||
|
edge of | flat portion of | |
Housing (L) | ||
Brush holder | ||
| complete | |
| Brush holder | |
| complete | |
Housing (L) |
|
The flat portion of Brush holder must be at exactly 90 degrees to the edge of Housing (L).