Spirit XR425 - page 11

XR 425

STEP 3: SEAT & HANDLE BAR ASSEMBLY

1. Install the Seat Cushion (61) on the Seat Carriage (4) with the 4pcs of M6x15mm Phillips Head

Screws (98).

2. Install the Handle Bar (6) onto the Seat Carriage (4) with the 4pc s of 3/8 x 1-3/4 Hex Head

Bolts (71), 4pcs of 3/8 x 19x1.5T Flat Washe rs (77), and 4pcs of 3/8 x 7T Nyloc Nu ts (89) by

using the 12/14mm Wrench (112) and 14/15mm Wrench (132).

3. Then plug the Hand pulse Cables (27-3)(27-4) into the sockets located on the left side rear

cover (26), just under the sea t. It does not matter which connector plugs into which soc k et.

Contents

Main Table of Contents ATTENTION- REGISTER YOUR PURCHASE CONGRATULATIONS ON YOUR NEW BIKE AND WELCOME Product Registration TO THE SPIRIT FAMILY! Page Important Electrical Information Important Operation Instructions Assembly Pack Check List Step 2 Step 1 Step 4 Step 3 Page Assembly Instructions Page Page Page Features Foot pedals Transportation Operation of Your Stationary Bike Power on Console Operation Quick Start Basic information Programming the console Entering/Changing Settings Manual Preset Programs The Programs HILL Fat Burn Cardio Strength Interval Custom User Defined Programs Page Heart Rate programs Rate of Perceived Exertion Using a Heart Rate Transmitter Erratic Operation: Heart Rate Control Program 1 & 2 (HR 1, HR 2) operation Manufacturers Limited Warranty XR 425 25 Effective April 15, 2007 BIKE WARRANTY Home use Labor 2 Years Frame weldments Lifetime All Other Components 5 Years Brake Lifetime