Screwdriving operation

Place the point of the driver bit in the screw head and apply pressure t o the tool. Start the tool slowly and then increase the speed gradually. Release the trigger as soon as the clutch cuts in.

NOTE :

.Make sure that the driver bit is inserted st:raight in the screw head, or the screw and/or bit may be damaged.

When driving wood screws, predrill pilot holes to make driving easier and to pre- vent splitting of the workpiece. See the chart.

Nominal diameter of	Recommended size
wood screw (mm)	of pilot hole Wnm)

3.1 (1/8”)	2.0	- 2 . 2
3.1 (1/8”)	15/64”	- 3/32’,)
I	’
3 . 5 19/64”)	2.2	- 2.5
3 . 5 19/64”)	(3/32” - 3/32”)
	(3/32” - 3/32”)

	I	’
	5.1 (13164”)	3.3 ~3.6
	5.1 (13164”)	1118’’ - 9/64‘,)
		1118’’ - 9/64‘,)