Features, Assembly, Use, Accessories | Black & Decker KR500CRE

g.Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Service

a.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional safety instructions for impact drills

◆Wear ear protectors with impact drills. Exposure to noise can cause hearing loss.

◆Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.

Electrical safety

This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.

◆This appliance is not intended for use by young or infirm persons without supervision. Children must be supervised to ensure they do not play with the appliance.

◆If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1.Variable speed switch

2.Lock-on button

3.Forward/reverse switch

4.Drilling mode selector

5.Side handle

6.Chuck

Assembly

Warning! Before assembly, make sure that the tool is switched off and unplugged.

Fitting the side handle (fig. A)

◆Turn the grip (7) counterclockwise until you can slide the side handle (5) onto the front of the tool as shown.

◆Rotate the side handle into the desired position.

◆Tighten the side handle by turning the grip clockwise.

Fitting a drill bit or screwdriver bit (fig. B)

◆Open the chuck by turning the front part (8) with one hand while holding the rear part (9) with the other.

◆Insert the bit shaft (10) into the chuck and firmly tighten the chuck.

Removing and refitting the chuck (fig. C)

◆Open the chuck as far as possible.

◆Remove the chuck retaining screw (11), located in the front part of the chuck, by turning it clockwise using a screwdriver.

◆Tighten an Allen key (12) into the chuck and strike it with a hammer as shown.

◆Remove the Allen key.

◆Remove the chuck by turning it counterclockwise.

◆To refit the chuck, screw it onto the spindle and secure it with the chuck retaining screw.

Use

Warning! Before drilling into walls, floors or ceilings, check for the location of wiring and pipes.

Selecting the direction of rotation (fig. D)

◆For drilling and for tightening screws, place the forward/ reverse switch (3) in the neutral position.

◆For loosening screws or removing a jammed drill bit, turn the forward/reverse switch (3) to the left.

Warning! Never change the direction of rotation while the motor is running.

Selecting the drilling mode

◆For drilling in masonry, set the drilling mode selector (4) to the position.

◆For drilling in other materials and for screwdriving, set the drilling mode selector (4) to the position.

Switching on and off (fig. E)

◆To switch the tool on, press the variable speed switch (1). The tool speed depends on how far you press the switch. As a general rule, use low speeds for large diameter drill bits and high speeds for smaller diameter drill bits.

◆For continuous operation, press the lock-on button (2) and release the variable speed switch. This option is available only at full speed.

◆To switch the tool off, release the variable speed switch. To switch the tool off when in continuous operation, press the variable speed switch once more and release it.

Accessories

The performance of your tool depends on the accessory used. Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool.

CD501CRE, AST1, KR500CRE, KR510XC, KR480 specifications

Black & Decker is a name synonymous with quality and reliability in power tools and home improvement equipment. Among their wide range of products, the KR500RE, KR480, KR510XC, KR500CRE, and AST1 stand out for their innovative features and user-friendly designs. These tools are engineered to meet the needs of both DIY enthusiasts and professional users alike.

The Black & Decker KR500RE is a powerful rotary hammer that combines efficiency with versatility. It boasts a 500-watt motor, providing enough power to tackle a variety of materials, including concrete, masonry, and wood. This model features a three-mode operation, allowing users to switch between drilling, hammering, and chiseling as needed. The ergonomic design includes a comfortable grip, enabling ease of use during extended projects. Additionally, the KR500RE's variable speed settings give users precise control over their work.

Moving on to the KR480, this compact drill is perfect for users seeking performance without sacrificing portability. This model offers an impressive balance of power and lightweight design, making it ideal for small to medium-sized tasks. The KR480 includes an integrated LED work light that illuminates dark workspaces, and its keyless chuck allows for quick and easy bit changes. The 480-watt motor ensures reliable performance, while the adjustable torque control helps prevent over-tightening.

The KR510XC model elevates user convenience with its advanced features. It includes an automatic spindle lock for safe and easy bit changes as well as an adjustable belt hook for easy storage when not in use. The KR510XC’s durable construction ensures longevity, even under heavy use. Its variable speed trigger offers enhanced control for both delicate tasks and robust drilling jobs.

The KR500CRE carries the legacy of Black & Decker with its unique combination of power and craftsmanship. Its enhanced motor functionality provides exceptional performance for tougher jobs. This model is designed with user comfort in mind, featuring a soft-grip handle and a compact frame for easy maneuverability in tight spaces.

Lastly, the AST1 is a highly versatile tool designed specifically for surface preparation and finishing tasks. It features a robust suction capability and replaceable sanding pads, making it an excellent choice for wood or metal finishing. This model is appreciated for its compact size and ease of use, allowing users to complete their projects efficiently.

In conclusion, the Black & Decker KR series and AST1 offer a diverse range of features and technologies. From powerful motors to ergonomic designs, these tools are built to provide reliability and convenience for a wide array of applications, appealing to both DIY hobbyists and seasoned professionals alike.