Intended use, General safety rules | Black & Decker KR500RE, KR480

Intended use

Your Black & Decker hammer drill has been designed for drilling in wood, metal, plastics, and masonry as well as for screwdriving purposes. This tool is intended for consumer use only.

General safety rules

Warning! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains operated (corded) power tool or battery operated (cordless) power tool.

SAVE THESE INSTRUCTIONS.

1. Work area

a.Keep work area clean and well lit. Cluttered and dark areas invite accidents.

b.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2. Electrical safety

a.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

b.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

3. Personal safety

a.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b.Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c.Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g.If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards.

4. Power tool use and care

a.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c.Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

CD501CRE, AST1, KR500CRE, KR510XC, KR480 specifications

Black & Decker is a name synonymous with quality and reliability in power tools and home improvement equipment. Among their wide range of products, the KR500RE, KR480, KR510XC, KR500CRE, and AST1 stand out for their innovative features and user-friendly designs. These tools are engineered to meet the needs of both DIY enthusiasts and professional users alike.

The Black & Decker KR500RE is a powerful rotary hammer that combines efficiency with versatility. It boasts a 500-watt motor, providing enough power to tackle a variety of materials, including concrete, masonry, and wood. This model features a three-mode operation, allowing users to switch between drilling, hammering, and chiseling as needed. The ergonomic design includes a comfortable grip, enabling ease of use during extended projects. Additionally, the KR500RE's variable speed settings give users precise control over their work.

Moving on to the KR480, this compact drill is perfect for users seeking performance without sacrificing portability. This model offers an impressive balance of power and lightweight design, making it ideal for small to medium-sized tasks. The KR480 includes an integrated LED work light that illuminates dark workspaces, and its keyless chuck allows for quick and easy bit changes. The 480-watt motor ensures reliable performance, while the adjustable torque control helps prevent over-tightening.

The KR510XC model elevates user convenience with its advanced features. It includes an automatic spindle lock for safe and easy bit changes as well as an adjustable belt hook for easy storage when not in use. The KR510XC’s durable construction ensures longevity, even under heavy use. Its variable speed trigger offers enhanced control for both delicate tasks and robust drilling jobs.

The KR500CRE carries the legacy of Black & Decker with its unique combination of power and craftsmanship. Its enhanced motor functionality provides exceptional performance for tougher jobs. This model is designed with user comfort in mind, featuring a soft-grip handle and a compact frame for easy maneuverability in tight spaces.

Lastly, the AST1 is a highly versatile tool designed specifically for surface preparation and finishing tasks. It features a robust suction capability and replaceable sanding pads, making it an excellent choice for wood or metal finishing. This model is appreciated for its compact size and ease of use, allowing users to complete their projects efficiently.

In conclusion, the Black & Decker KR series and AST1 offer a diverse range of features and technologies. From powerful motors to ergonomic designs, these tools are built to provide reliability and convenience for a wide array of applications, appealing to both DIY hobbyists and seasoned professionals alike.