Chicago Electric 93632 operating instructions Personal safety

Page 3

c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d.Do not abuse the cord. Never use the cord for carrying, pulling or unplug- ging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e.When operating a power tool out- doors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of elec- tric shock.

f. If operating a power tool in a damp location is unavoidable, use a Ground Fault Circuit Interrupter (GFCI) pro- tected supply. Use of a GFCI reduces the risk of electric shock.

3.Personal safety

a.Stay alert, watch what you are doing and use common sense when operat- ing a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medica- tion. A moment of inattention while op- erating power tools may result in serious personal injury.

b.Use personal protective equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing pro- tection used for appropriate conditions will reduce personal injuries.

c.Prevent unintentional starting. En- sure the Trigger is in the off-position before connecting to power source, picking up or carrying the tool. Car- rying power tools with your finger on the Trigger or energizing power tools that have the Trigger on invites accidents.

d.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotat- ing part of the power tool may result in personal injury.

e.Do not overreach. Keep proper foot- ing and balance at all times. This enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from mov- ing parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g.If devices are provided for the con- nection of dust extraction and col- lection facilities, ensure these are connected and properly used. Use of these devices can reduce dust-related hazards.

h.Only use safety equipment that has been approved by an appropriate standards agency. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area.

4.Power tool use and care

a.Do not force the power tool. Use the correct power tool for your applica- tion. The correct power tool will do the job better and safer at the rate for which it was designed.

b.Do not use the power tool if the Trig- ger does not turn it on and off. Any power tool that cannot be controlled with the Trigger is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or the battery pack from the power tool before making any ad- justments, changing accessories, or

SKU 93632

For technical questions, please call 1-800-444-3353.

Page 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Heavy-duty Low Speed VSR Drill For technical questions or replacement parts, please callGeneral Power Tool Safety Warnings Save This ManualSave all warnings and instructions for future reference Personal safety Drill Safety Warnings Vibration Safety See 3-Prong Plug and Outlet GroundingGrounded Tools Tools with Three Prong Plugs Double Insulated Tools Tools with Two Prong Plugs25’ 50’ 75’ Extension CordsSee Outlets for 2-Prong Plug See Table aUnpacking SpecificationsInstructions for putting Into use FeaturesOperating Instructions Tool Set Up Installing Drill BitsSKU For technical questions, please call General Operating InstructionsMaintenance Inspection Drill bit wobbles in Chuck TroubleshootingDrill operates but hole is not effectively drilled Drill will not turn onPart Description Qty Parts ListAssembly Drawing Limited 90 DAY Warranty

93632 specifications

The Chicago Electric 93632 is a versatile and reliable tool that has gained popularity among DIY enthusiasts and professionals alike. This particular model is a powerful 10-inch miter saw, designed to deliver precision and excellence in various cutting applications. It stands out in the crowded market of electric saws with its combination of performance, ease of use, and affordable price point.

One of the most notable features of the Chicago Electric 93632 is its robust motor, which provides ample power for cutting through a variety of materials, including hardwood, softwood, and even composite materials. The 15-amp motor is designed to maintain consistent performance, allowing users to achieve clean and precise cuts every time. The saw also boasts an impressive RPM rating, enabling it to cut through tougher materials with relative ease.

In terms of cutting capacity, the Chicago Electric 93632 offers both bevel and miter adjustments, making it suitable for angled cuts as well as crosscuts. The tool can be adjusted for bevel cuts up to 45 degrees, which enhances its versatility for different woodworking projects. The miter gauge allows for precise adjustments up to 45 degrees in both directions, ensuring that users can tailor their cuts to fit specific requirements.

Another key technology incorporated into the Chicago Electric 93632 is its laser guide system. This innovative feature projects a line on the cutting surface, allowing users to visualize their cutting path accurately. This technology significantly reduces the chances of errors and enhances the overall quality of the finished product.

Safety is also a top priority with this model. The saw is equipped with various safety features, including a blade guard that covers the blade when not in use, a safety switch to prevent accidental startups, and an ergonomic handle designed for comfort during extended use. These features help to ensure users can operate the saw safely while focusing on their projects.

In summary, the Chicago Electric 93632 stands out due to its powerful motor, adjustable cutting angles, laser guide technology, and inherent safety features. It is a practical choice for users looking for a dependable saw that offers precision and versatility without breaking the bank. Whether you are a seasoned professional or a weekend warrior, this tool is designed to meet your cutting needs efficiently and effectively.
Top Page Image Contents