Chicago Electric 93632 Extension Cords, See Outlets for 2-Prong Plug, See Table a, 25’ 50’ 75’

Page 7

2.Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration.

(See Outlets for 2-Prong Plug.)

Extension Cords

1.Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire exten- sion cord.

2.As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage.

(See Table A.)

3.The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord.

(See Table A.)

4.When using more than one extension cord to make up the total length, make sure each cord contains at least the mini- mum wire size required. (See Table A.)

5.If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size.

(See Table A.)

6.If you are using an extension cord out- doors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

7.Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.

8.Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE

EXTENSION CORD

 

LENGTH

 

AMPERES

 

 

25’

50’

75’

100’

150’

(at full load)

 

 

 

 

 

 

 

 

 

 

 

0 – 2.0

18

18

18

18

16

2.1

– 3.4

18

18

18

16

14

3.5

– 5.0

18

18

16

14

12

5.1

– 7.0

18

16

14

12

12

7.1 – 12.0

18

14

12

10

-

12.1

– 16.0

14

12

10

-

-

16.1

– 20.0

12

10

-

-

-

* Based on limiting the line

TABLE A voltage drop to five volts at 150% of the rated amperes.

 

 

 

 

 

 

Symbology

 

 

 

Double Insulated

 

 

 

Canadian Standards Association

 

 

 

Underwriters Laboratories, Inc.

 

 

V~

Volts Alternating Current

A

Amperes

 

 

 

n0 xxxx/min.

No Load Revolutions per Minute

(RPM)

SKU 93632

For technical questions, please call 1-800-444-3353.

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Heavy-duty Low Speed VSR Drill For technical questions or replacement parts, please callSave This Manual General Power Tool Safety WarningsSave all warnings and instructions for future reference Personal safety Drill Safety Warnings Vibration Safety See 3-Prong Plug and Outlet GroundingGrounded Tools Tools with Three Prong Plugs Double Insulated Tools Tools with Two Prong Plugs25’ 50’ 75’ Extension CordsSee Outlets for 2-Prong Plug See Table aUnpacking SpecificationsInstructions for putting Into use FeaturesOperating Instructions Tool Set Up Installing Drill BitsSKU For technical questions, please call General Operating InstructionsMaintenance Inspection Drill bit wobbles in Chuck TroubleshootingDrill operates but hole is not effectively drilled Drill will not turn onPart Description Qty Parts ListAssembly Drawing Limited 90 DAY Warranty

93632 specifications

The Chicago Electric 93632 is a versatile and reliable tool that has gained popularity among DIY enthusiasts and professionals alike. This particular model is a powerful 10-inch miter saw, designed to deliver precision and excellence in various cutting applications. It stands out in the crowded market of electric saws with its combination of performance, ease of use, and affordable price point.

One of the most notable features of the Chicago Electric 93632 is its robust motor, which provides ample power for cutting through a variety of materials, including hardwood, softwood, and even composite materials. The 15-amp motor is designed to maintain consistent performance, allowing users to achieve clean and precise cuts every time. The saw also boasts an impressive RPM rating, enabling it to cut through tougher materials with relative ease.

In terms of cutting capacity, the Chicago Electric 93632 offers both bevel and miter adjustments, making it suitable for angled cuts as well as crosscuts. The tool can be adjusted for bevel cuts up to 45 degrees, which enhances its versatility for different woodworking projects. The miter gauge allows for precise adjustments up to 45 degrees in both directions, ensuring that users can tailor their cuts to fit specific requirements.

Another key technology incorporated into the Chicago Electric 93632 is its laser guide system. This innovative feature projects a line on the cutting surface, allowing users to visualize their cutting path accurately. This technology significantly reduces the chances of errors and enhances the overall quality of the finished product.

Safety is also a top priority with this model. The saw is equipped with various safety features, including a blade guard that covers the blade when not in use, a safety switch to prevent accidental startups, and an ergonomic handle designed for comfort during extended use. These features help to ensure users can operate the saw safely while focusing on their projects.

In summary, the Chicago Electric 93632 stands out due to its powerful motor, adjustable cutting angles, laser guide technology, and inherent safety features. It is a practical choice for users looking for a dependable saw that offers precision and versatility without breaking the bank. Whether you are a seasoned professional or a weekend warrior, this tool is designed to meet your cutting needs efficiently and effectively.
Top Page Image Contents