Troubleshooting
Problem | Possible Causes | Likely Solutions |
Tool will not start. | Battery not charged. | Charge Battery. |
Performance | Accessory dull or damaged. | Keep accessories sharp. Replace as needed. |
decreases over |
|
|
time. |
|
|
Excessive noise | Internal damage or wear. | Have technician service tool. |
or rattling. |
|
|
Tool chatters | Low Torque setting. | Select higher Torque setting. |
when tightening |
|
|
fasteners |
|
|
Overheating. | 1. Forcing tool to work too | 1. Allow tool to work at its own rate. |
| fast. | 2. Keep cutting accessories sharp. Replace |
| 2. Accessory dull or | as needed. |
| damaged. | 3. Wear |
|
| |
| 3. Blocked motor housing | blowing dust out of motor using compressed |
| vents. | air. |
Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts.
SKU 67089 | For technical questions, please call | Page 9 |