Operating Instructions

NOTE: For additional information regarding the parts listed in the following pages, refer to the Parts List & Assembly Diagram.

WARNING! Remove the Battery Pack (19) from the tool and set the Rotation Button

(6)to its center, locked, position before making any adjustments, changing acces- sories, or storing the tool.

Gear Box with

Torque Ring (2)

Chuck (1)

Rotation Button (6)

Trigger (12)

Battery Pack (19)

1.To install a screwdriver bit, insert the correct Bit (26) for the application into the magnetic Bit Adapter (27). Never insert one of the included Bits (26) directly into the Chuck. A smaller gauge than 1/4” will not be firmly secured and may result in injury or property damage. With the Chuck (1) pointing away from you, pull gently on the Chuck sleeve and insert the Bit Adapter into the Chuck. Release the Chuck sleeve and the Bit Adapter will lock firmly in place. The Chuck accepts 1/4” Hex Shank only. To remove the Bit Adapter (27), reverse the above-mentioned procedure.

2.Secure the workpiece in place, using a vise or clamps (not included).

Note: Never change Torque Setting while the Cordless Driver is still rotating, as this can damage the Cordless Driver.

3.Selecting an appropriate torque setting (1-24):

SKU 96298

For technical questions, please call 1-800-444-3353.

PAGE 10