SWITCH
See Figure 2.
To tum your drill ON, depress the switch tdgger. To tum it OFF, release the switch trigger.
CENTERPOSmON
(LOCK)
SELECTOR
SWITCHTRIGGER
Fig. 2
VARIABLE SPEED
This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.
Note: You might hear a whistling or ringing noise from the switch dudng use. Do not be concerned, this is a normal part of the switch function.
SWITCH LOCK
See Figure 3.
The switch tdgger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position.
SELECTOR
FORWARD
CENTERPOSmON
(LOCK)
SWITCHTRIGGER Fig. 3
WARNING: Battery tools are always in operating condition. Therefore, switch should
always be locked when not in use or carrying at your side.
REVERSIBLE
See Figure 3.
This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch tdgger. With the ddll held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The ddlling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked.
_lb CAUTION: To prevent gear damage, always allow chuck to come to a complete stop before
changing the direction of rotation.
To stop, release switch tdgger and allow the chuck to come to a complete stop.
8