Batteries

_ ARNING: When servicing, use only identical Craftsman replacement parts. Use of any other

part may create a hazard or cause product damage.

Do not abuse power tools. Abusive practices can damage tool as well as workpiece.

_ WARNING: Always remove the battery pack from the tool when assembling parts, making adjust-

ments, cleaning or when not in use. Removing the battery pack will prevent accidental starting that could cause serious personal injury.

Use clean cloths to remove dirt, carbon dust, etc..

,_WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.

Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer. All other parts should be replaced at a Sears Service Center.

WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

,& WARNING: Always wear safety glasses with side shields when using compressed air to clean

tools. If the operation is dusty, also wear a dust mask.

The battery pack for the drill-driver is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.

The batteries in this tool have been designed to provide maximum trouble free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when

wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

[] Store and charge your batteries in a cool area. Temperatures below 50°F or above 100°F will shorten battery life.

[] Never store batteries in a discharged condition. Recharge them immediately after they are discharged.

[] All batteries gradually lose their charge. The higher the temperature the quicker they lose their charge. If you store your tool for long periods of time without using it, recharge the batteries every month or two. This practice will prolong battery life.

To preserve natural resources, please recycle or dispose of batteries properly.

This product contains nickel- cadmium batteries. Local, state or

federal laws may prohibit disposal of nickel-cadmium batteries in

ordinary trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

BATTERY PACK REMOVAL AND

PREPARATION FOR RECYCLING

WARNING: Upon removal, cover the battery pack'sterminals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its components. Nickel- cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.