Craftsman 315.27127 Forwarreverse Selector Centerposition Lock Switch Lock, Reversible, Hi-lo

Page 12

SWITCH

See Figure 11.

To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger.

FORWAR_REVERSE

SELECTOR

CENTERPOSITION

(LOCK)

SWITCH LOCK

See Figure 13.

The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position.

SELECTOR

CENTERPOSITION_,._REVERSE -_

,,OCK

TRIGGER Fig, 11

VARIABLE SPEED

This tool has a variable speed switch that delivers higher speed and torque with increased trigger pressure, Speed is controlled by the amount of switch trigger depression,

Note: You might hear a whistling or ringing noise from the switch during use. Do not be concerned, this is a normal part of the switch function.

TWO SPEED GEAR TRAIN

See Figure 12.

Your drill has a two-speed gear train designed for drilling or driving at LO (1) or HI (2) speeds. A slide switch is located on top of your drill to select either LO (1) or HI (2) speed, When using drill in the LO (1) speed range, speed will decrease and unit will have more power and torque. When using drill in the HI (2) speed range, speed will increase and unit will have less power and torque, Use LO (1) speed for high power and torque applications and HI (2) speed for fast drilling or driving applications.

TWOSPEED

GEARTRAIN(HI-LO) LO

\SPEED

HI

SPEED

Fig. 12

Fig. 13

,_ WARNING: Battery tools are always in operating condition. Therefore, switch should always be locked

when not in use or carrying at your side.

REVERSIBLE

See Figure 13.

This tool has the feature of being reversible. The direction of rotation is controlled by a selector located above the switch trigger. With the drill held in normal operating position, the direction of rotation selector should be positioned to the left of the switch for drilling. The drilling direction is reversed when the selector is to the right of the switch. When the selector is in center position, the switch trigger is locked.

,_ CAUTION: To prevent gear damage, always allow chuck to come to a complete stop before changing

the direction of rotation or the two speed gear train

(hi-lo).

To stop, release switch trigger and allow the chuck to come to a complete stop.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OwnersManual Table of Contents Model Battery Pack ChargerPage Important Safety Instructions For Charger Connector or Uninsulated Battery TERMI- NALSymbols Name DESIGNATION/EXPLANATION DefinitionsSwitch Switch LockProduct Specifications Hammer Drill Know Your Hammer DrillTwospeed GEARTRAINHI-LO Backsideof Charger Batterypackshown 8inFig,2 To Attach Battery Pack to Drill To Remove Battery Pack from DrillDepresslatchto Releasebatterypack BatterypackInstalling Bits Using Depth Gage RODChuckjaws Drillbit Lock Chucksleeve Removing BitsBattery Pack Remove Charger Attach Grooves Charger and Battery PackImportant Information for Recharging HOT BatteriesForwarreverse Selector Centerposition Lock Switch Lock Selector CENTERPOSITION,.REVERSETwospeed GEARTRAINHI-LO LO \SPEED Speed ReversibleTo Decrease Adjustingring Torque Adjustable Torque ClutchTorque Drillbit BIT StorageApplications Use only for the purposes listed belowLevel Drilling TOP View Level DrillingTo Adjust Drilling or Hammer Mode Mode SelectorWood Drilling Metal DrillingChuckremoval Mallet Chuckjaws HEX Keykeyless WrenchchuckScrewdriver To Retighten a Loose ChuckBattery Pack Removal and Preparation For Recycling Parts may create a hazard or cause product damageBatteries OverloadWarranty IL WarningSears, Roebuck and Co., Dept WA, Hoffman Estates, IL See Back page for Parts Ordering Instructions List Key Number Description QuanCan Be Purchased At Your Nearest Sears Retail Store HomeCentrals
Top Page Image Contents