Defective Battery, To Detach Battery Pack Fig

CHARGING A HOT BATTERY PACK

If the battery pack is above normal temperature range, the red LED will illuminate and the green LED will be off. When the battery pack cools down to approximately 104°F (40°C), the charger will automatically begin charging.

CHARGING A COLD BATTERY PACK

If the battery pack is below the normal temperature range, the red LED will illuminate and the green LED will be off. When the battery warms to a temperature of more than 32°F (0°C), the charger will automatically begin charging.

DEFECTIVE BATTERY

If the charger detects a problem with the battery, the battery may be defective: the red LED will begin flashing and the green LED will be off.

1.If registering as defective, remove and reinsert the battery pack in the charger. If the LED status reads "defective" a second time, try charging a different battery pack.

2.If a different battery pack charges normally, dispose of the defective battery pack (see Maintenance section).

3.If a different battery pack also indicates "defective," the charger may be defective.

BATTERY CHARGING

direction of rotation (forward/center IocW reverse) selector in the center position.

2.Align the raised rib on the battery pack with the grooves in the Right-Angle Impact Driver, and then insert the battery pack into the tool.

NOTE: Make sure that the latch on the battery pack snaps into place and that the battery pack is secured to the tool before beginning operation.

_L. CAUTION: When placing the battery pack in the tool, be sure that the raised rib on battery pack aligns with the groove inside the Right-Angle Impact Driver and that the latches snap into place properly. Improper attachment of the battery pack can cause damage to internal components.

TO DETACH BATTERY PACK (Fig, 4)

1.Lock the trigger switch on the Right-Angle Impact Driver by placing the direction of rotation (forward / center lock/reverse) selector in the Center Lock position.

2.Depress the battery release buttons located on the both sides of the battery pack to release the battery pack.

3.Pull the battery pack out and remove it from the tool.

_lk WARNING: Battery tools are always in operating condition. Therefore, the

direction-of-rotation selector should always be locked when the tool is not in use or when carrying it your side.

If the battery pack is being charged within a normal surrounding temperature range (32°F to 104°F), the green LED will begin flashing and the red LED will be off. The battery pack will reach a full charge in 30 minutes.

BATTERY FULL

If the battery pack is within normal temperature range, the green LED will illuminate and the red LED will be off. The battery pack is fully charged and ready to use. The battery pack will fully charge, but will not overcharge, if left on

the charger.

Fig. 4

NOTE: The charger may become warm with several

continuous charge cycles. This is part of the normal operation of the charge. Charge in a well ventilated area.

TO ATTACH BATTERY PACK

(Fig. 4)

1.Lock the trigger switch on the Right-Angle Impact Driver by placing the

TRIGGER SWITCH (Fig, 5)

To turn the 12V Right-Angle Impact Driver ON, depress the trigger switch.

To turn it OFF, release the trigger switch.

VARIABLE SPEED (Fig,5)

The variable-speed trigger switch delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.

Fig. 5

Direction-

Variable-speedof-rotation

trigger switchselector (Forward/

Center

Lock/ Reverse

17562 ManuaLRevised_$0

0607

Page 14

17562 ManuaLRevised_10

0607

Page 15

320.17562 specifications

The Craftsman 320.17562 is a versatile and robust tool designed for both home and professional use. This compressor stands out for its reliable performance and innovative features, making it an essential addition to any workshop or job site.

One of the primary attributes of the Craftsman 320.17562 is its powerful motor. This compressor is equipped with a ¾ HP motor that guarantees consistent air delivery, ensuring that it can handle various tasks ranging from inflating tires to powering pneumatic tools. With a maximum pressure of 125 PSI, users can expect high-quality performance with ample pressure to suit most applications.

The design of this compressor reflects a user-friendly approach. It features an easy-to-read pressure gauge that allows users to monitor air pressure levels quickly. The on/off switch is conveniently positioned, making operation simple and straightforward. Additionally, the unit boasts a low-maintenance oil-free pump, which eliminates the hassle of regular oil changes and contributes to the overall efficiency of the tool.

Portability is another hallmark of the Craftsman 320.17562. Weighing in at a manageable size and equipped with a durable handle, this compressor is easy to transport from one job location to another. Whether working in a garage, on a construction site, or at home, users will appreciate the convenience of moving this compressor around as needed.

In terms of safety, the Craftsman 320.17562 includes a thermal overload protection feature. This technology prevents the motor from overheating, thus enhancing the longevity of the tool and ensuring safe operation during prolonged use. Additionally, the compressor is designed with stable footing, reducing the risk of tipping over while operational.

The Craftsman 320.17562 is compatible with a variety of air tools, making it an adaptable solution for several applications. From powering nail guns to spraying paint, this compressor consistently delivers dependable performance.

In summary, the Craftsman 320.17562 is an ideal choice for those seeking a reliable, portable, and efficient air compressor. With its powerful motor, user-friendly features, and versatile applications, it not only meets but also exceeds the expectations of both DIY enthusiasts and professionals alike.